Add Origami Instructions Guide - Fixes sumanth-0#615

aniruddhaadak80 · web-flow · commit 4b3504cd417f · 2025-10-11T12:22:29.000+05:30
Created a Python script that provides step-by-step origami folding instructions from a preset selection of 4 designs: Traditional Crane, Paper Boat, Jumping Frog, and Simple Butterfly. The script is interactive and exactly 100 lines long.
diff --git a/snippets/origami_instructions_guide/origami_instructions_guide.py b/snippets/origami_instructions_guide/origami_instructions_guide.py
@@ -0,0 +1,100 @@
+#!/usr/bin/env python3
+"""Origami Instructions Guide - Step-by-step folding instructions from preset selection"""
+
+origami_library = {
+    "1": {
+        "name": "Traditional Crane",
+        "difficulty": "Intermediate",
+        "steps": [
+            "Start with a square piece of paper, colored side down",
+            "Fold in half diagonally both ways, then unfold",
+            "Fold in half horizontally both ways, then unfold",
+            "Bring the top three corners down to the bottom corner (waterbomb base)",
+            "Fold the top triangular flaps into the center",
+            "Fold the top down over the flaps",
+            "Unfold the last two steps",
+            "Petal fold: Lift the first layer up and fold the sides inward",
+            "Flip and repeat the petal fold on the other side",
+            "Fold both flaps up to create the legs",
+            "Inside reverse fold one leg to make the head",
+            "Fold down the wings and your crane is complete!"
+        ]
+    },
+    "2": {
+        "name": "Paper Boat",
+        "difficulty": "Easy",
+        "steps": [
+            "Start with a rectangular piece of paper",
+            "Fold the paper in half lengthwise",
+            "Fold in half widthwise, then unfold",
+            "Fold the top corners down to the center crease",
+            "Fold the bottom edge up on both sides",
+            "Open from the bottom and flatten into a square",
+            "Fold the bottom corners up on both sides",
+            "Open from the bottom and flatten again",
+            "Gently pull the top corners apart",
+            "Your boat is ready to sail!"
+        ]
+    },
+    "3": {
+        "name": "Jumping Frog",
+        "difficulty": "Easy",
+        "steps": [
+            "Start with a square piece of paper",
+            "Fold in half lengthwise, then unfold",
+            "Fold the top corners down to the center line",
+            "Fold the angled sides to the center",
+            "Fold the bottom edge up to the base of the triangle",
+            "Fold the bottom corners up and out",
+            "Fold the bottom edge up again",
+            "Fold in half, bringing the bottom to the back",
+            "Fold the back layer down to create a step",
+            "Press on the frog's back to make it jump!"
+        ]
+    },
+    "4": {
+        "name": "Simple Butterfly",
+        "difficulty": "Easy",
+        "steps": [
+            "Start with a square piece of paper, colored side down",
+            "Fold in half diagonally, then unfold",
+            "Fold in half diagonally the other way",
+            "Fold the top corner down to the bottom corner",
+            "Fold a small triangle at the top down",
+            "Flip the paper over",
+            "Fold in half vertically, bringing the wings together",
+            "Your butterfly is complete!"
+        ]
+    }
+}
+
+def display_menu():
+    print("\n=== ORIGAMI INSTRUCTIONS GUIDE ===")
+    print("\nAvailable Origami Designs:")
+    for key, origami in origami_library.items():
+        print(f"{key}. {origami['name']} - Difficulty: {origami['difficulty']}")
+    print("0. Exit")
+
+def display_instructions(origami_data):
+    print(f"\n{'='*50}")
+    print(f"{origami_data['name'].upper()}")
+    print(f"Difficulty Level: {origami_data['difficulty']}")
+    print(f"{'='*50}\n")
+    for i, step in enumerate(origami_data['steps'], 1):
+        print(f"Step {i}: {step}")
+        input("\nPress Enter for next step..." if i < len(origami_data['steps']) else "\nPress Enter to return to menu...")
+
+def main():
+    while True:
+        display_menu()
+        choice = input("\nSelect an origami design (0-4): ").strip()
+        if choice == "0":
+            print("\nHappy folding! Goodbye!")
+            break
+        elif choice in origami_library:
+            display_instructions(origami_library[choice])
+        else:
+            print("\nInvalid choice. Please try again.")
+
+if __name__ == "__main__":
+    main()
