Skip to content

README.md

Latest commit

 

History

History
12 lines (8 loc) · 758 Bytes

README.md

File metadata and controls

12 lines (8 loc) · 758 Bytes

JMRITrainNode

TrainNode is a JMRI compatible I/O controller built on the MQTT protocol. Using the Raspberry Pi Pico, each node can support up to 16 turnouts as standard, or more with user addons.

Note: This repo is very much a work in progress, see JMRITrainNode for a complete build for micropython.

Required Hardware

This project uses the Wiznet Ethernet Hat for the Raspberry Pi Pico (RP2040), which is available at major retailers such as Core Electronics in Australia. This is used for networking.

Software Requirements

Screen or other serial terminal can be used for debugging screen /dev/ttyACM0 115000