/* C:B**************************************************************************
This software is Copyright 2014-2017 Bright Plaza Inc. <drivetrust@drivetrust.com>

This file is part of sedutil.

sedutil is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

sedutil is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with sedutil.  If not, see <http://www.gnu.org/licenses/>.

 * C:E********************************************************************** */
#include "os.h"
#include <malloc.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <arpa/inet.h>
#include <scsi/sg.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <linux/hdreg.h>
#include <errno.h>
#include <vector>
#include <fstream>
#include "DtaDevLinuxSata.h"
#include "DtaHexDump.h"
//
// taken from <scsi/scsi.h> to avoid SCSI/ATA name collision
// 

/*
 *  Status codes
 */

#define GOOD                 0x00
#define CHECK_CONDITION      0x01
#define CONDITION_GOOD       0x02
#define BUSY                 0x04
#define INTERMEDIATE_GOOD    0x08
#define INTERMEDIATE_C_GOOD  0x0a
#define RESERVATION_CONFLICT 0x0c
#define COMMAND_TERMINATED   0x11
#define QUEUE_FULL  

using namespace std;

/** The Device class represents a single disk device.
 *  Linux specific implementation using the SCSI generic interface and
 *  SCSI ATA Pass Through (12) command
 */
DtaDevLinuxSata::DtaDevLinuxSata() {
isSAS = 0;
}

bool DtaDevLinuxSata::init(const char * devref)
{
    LOG(D1) << "Creating DtaDevLinuxSata::DtaDev() " << devref;
	bool isOpen = FALSE;

    if(access("/dev/sda", R_OK | W_OK)) {
        LOG(E) << "You do not have permission to access the raw disk in write mode";
        LOG(E) << "Perhaps you might try sudo to run as root";
    }

    if ((fd = open(devref, O_RDWR)) < 0) {
        isOpen = FALSE;
        // This is a D1 because diskscan looks for open fail to end scan
        LOG(D1) << "Error opening device " << devref << " " << (int32_t) fd;
        //        if (-EPERM == fd) {
        //            LOG(E) << "You do not have permission to access the raw disk in write mode";
        //            LOG(E) << "Perhaps you might try sudo to run as root";
        //        }
    }
    else {
        isOpen = TRUE;
    }
	return isOpen;
}

/** Send an ioctl to the device using pass through. */
uint8_t DtaDevLinuxSata::sendCmd(ATACOMMAND cmd, uint8_t protocol, uint16_t comID,
                         void * buffer, uint32_t bufferlen)
{
    if(isSAS) {
        return(sendCmd_SAS(cmd, protocol, comID, buffer, bufferlen));
    }
    sg_io_hdr_t sg;
    uint8_t sense[32]; // how big should this be??
    uint8_t cdb[12];

    LOG(D1) << "Entering DtaDevLinuxSata::sendCmd";
    memset(&cdb, 0, sizeof (cdb));
    memset(&sense, 0, sizeof (sense));
    memset(&sg, 0, sizeof (sg));
    /*
     * Initialize the CDB as described in SAT-2 and the
     * ATA Command set reference (protocol and commID placement)
     * We need a few more standards bodies --NOT--
     */

    cdb[0] = 0xa1; // ata pass through(12)
    /*
     * Byte 1 is the protocol 4 = PIO IN and 5 = PIO OUT
     * Byte 2 is:
     * bits 7-6 OFFLINE - Amount of time the command can take the bus offline
     * bit 5    CK_COND - If set the command will always return a condition check
     * bit 4    RESERVED
     * bit 3    T_DIR   - transfer direction 1 in, 0 out
     * bit 2    BYTE_BLock  1 = transfer in blocks, 0 transfer in bytes
     * bits 1-0 T_LENGTH -  10 = the length id in sector count
     */
    if (IF_RECV == cmd) {
        cdb[1] = 4 << 1; // PIO DATA IN
        cdb[2] = 0x0E; // T_DIR = 1, BYTE_BLOCK = 1, Length in Sector Count
        sg.dxfer_direction = SG_DXFER_FROM_DEV;
    }
    else {
        cdb[1] = 5 << 1; // PIO DATA OUT
        cdb[2] = 0x06; // T_DIR = 0, BYTE_BLOCK = 1, Length in Sector Count
        sg.dxfer_direction = SG_DXFER_TO_DEV;
    }
    cdb[3] = protocol; // ATA features / TRUSTED S/R security protocol
    cdb[4] = bufferlen / 512; // Sector count / transfer length (512b blocks)
    //      cdb[5] = reserved;
    cdb[7] = ((comID & 0xff00) >> 8);
    cdb[6] = (comID & 0x00ff);
    //      cdb[8] = 0x00;              // device
    cdb[9] = cmd; // IF_SEND/IF_RECV
    //      cdb[10] = 0x00;              // reserved
    //      cdb[11] = 0x00;              // control
    /*
     * Set up the SCSI Generic structure
     * see the SG HOWTO for the best info I could find
     */
    sg.interface_id = 'S';
    //      sg.dxfer_direction = Set in if above
    sg.cmd_len = sizeof (cdb);
    sg.mx_sb_len = sizeof (sense);
    sg.iovec_count = 0;
    sg.dxfer_len = bufferlen;
    sg.dxferp = buffer;
    sg.cmdp = cdb;
    sg.sbp = sense;
    sg.timeout = 60000;
    sg.flags = 0;
    sg.pack_id = 0;
    sg.usr_ptr = NULL;
    //    LOG(D4) << "cdb before ";
    //    IFLOG(D4) hexDump(cdb, sizeof (cdb));
    //    LOG(D4) << "sg before ";
    //    IFLOG(D4) hexDump(&sg, sizeof (sg));
    /*
     * Do the IO
     */
    if (ioctl(fd, SG_IO, &sg) < 0) {
        LOG(D4) << "cdb after ";
        IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
        LOG(D4) << "sense after ";
        IFLOG(D4) DtaHexDump(sense, sizeof (sense));
        return 0xff;
    }
    //    LOG(D4) << "cdb after ";
    //    IFLOG(D4) hexDump(cdb, sizeof (cdb));
    //    LOG(D4) << "sg after ";
    //    IFLOG(D4) hexDump(&sg, sizeof (sg));
    //    LOG(D4) << "sense after ";
    //    IFLOG(D4) hexDump(sense, sizeof (sense));
    if (!((0x00 == sense[0]) && (0x00 == sense[1])))
        if (!((0x72 == sense[0]) && (0x0b == sense[1]))) return 0xff; // not ATA response
    return (sense[11]);
}

void DtaDevLinuxSata::identify(OPAL_DiskInfo& disk_info)
{
     sg_io_hdr_t sg;
    uint8_t sense[32]; // how big should this be??
    uint8_t cdb[12];
    memset(&cdb, 0, sizeof (cdb));
    memset(&sense, 0, sizeof (sense));
    memset(&sg, 0, sizeof (sg));
    LOG(D4) << "Entering DtaDevLinuxSata::identify()";
    vector<uint8_t> nullz(512, 0x00);
    uint8_t * buffer = (uint8_t *) memalign(IO_BUFFER_ALIGNMENT, MIN_BUFFER_LENGTH);
    memset(buffer, 0, MIN_BUFFER_LENGTH);
     /*
     * Initialize the CDB as described in SAT-2 and the
     * ATA Command set reference (protocol and commID placement)
     * We need a few more standards bodies --NOT--
     */

    cdb[0] = 0xa1; // ata pass through(12)
    /*
     * Byte 1 is the protocol 4 = PIO IN and 5 = PIO OUT
     * Byte 2 is:
     * bits 7-6 OFFLINE - Amount of time the command can take the bus offline
     * bit 5    CK_COND - If set the command will always return a condition check
     * bit 4    RESERVED
     * bit 3    T_DIR   - transfer direction 1 in, 0 out
     * bit 2    BYTE_BLock  1 = transfer in blocks, 0 transfer in bytes
     * bits 1-0 T_LENGTH -  10 = the length id in sector count
     */
   cdb[1] = 4 << 1; // PIO DATA IN
   cdb[2] = 0x0E; // T_DIR = 1, BYTE_BLOCK = 1, Length in Sector Count
   sg.dxfer_direction = SG_DXFER_FROM_DEV;
   cdb[4] = 1;
   cdb[9] = 0xec; // IF_SEND/IF_RECV
    //      cdb[10] = 0x00;              // reserved
    //      cdb[11] = 0x00;              // control
    /*
     * Set up the SCSI Generic structure
     * see the SG HOWTO for the best info I could find
     */
    sg.interface_id = 'S';
    //      sg.dxfer_direction = Set in if above
    sg.cmd_len = sizeof (cdb);
    sg.mx_sb_len = sizeof (sense);
    sg.iovec_count = 0;
    sg.dxfer_len = 512;
    sg.dxferp = buffer;
    sg.cmdp = cdb;
    sg.sbp = sense;
    sg.timeout = 60000;
    sg.flags = 0;
    sg.pack_id = 0;
    sg.usr_ptr = NULL;
    //    LOG(D4) << "cdb before ";
    //    IFLOG(D4) hexDump(cdb, sizeof (cdb));
    //    LOG(D4) << "sg before ";
    //    IFLOG(D4) hexDump(&sg, sizeof (sg));
    /*
     * Do the IO
     */
    if (ioctl(fd, SG_IO, &sg) < 0) {
        LOG(D4) << "cdb after ";
        IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
        LOG(D4) << "sense after ";
        IFLOG(D4) DtaHexDump(sense, sizeof (sense));
        disk_info.devType = DEVICE_TYPE_OTHER;
        identify_SAS(&disk_info);
        return;
    }
    //    LOG(D4) << "cdb after ";
    //    IFLOG(D4) hexDump(cdb, sizeof (cdb));
    //    LOG(D4) << "sg after ";
    //    IFLOG(D4) hexDump(&sg, sizeof (sg));
    //    LOG(D4) << "sense after ";
    //    IFLOG(D4) hexDump(sense, sizeof (sense));

    ifstream kopts;
    kopts.open("/sys/module/libata/parameters/allow_tpm", ios::in);
    if (!kopts) {
	LOG(W) << "Unable to verify Kernel flag libata.allow_tpm ";
    } 
    else {
        if('1' !=  kopts.get()) {
            LOG(E) << "The Kernel flag libata.allow_tpm is not set correctly";
               LOG(E) << "Please see the readme note about setting the libata.allow_tpm ";
        }
        kopts.close();
    }

    if (!(memcmp(nullz.data(), buffer, 512))) {
        disk_info.devType = DEVICE_TYPE_OTHER;
        return;
    }
    IDENTIFY_RESPONSE * id = (IDENTIFY_RESPONSE *) buffer;
//    disk_info->devType = id->devType;
    disk_info.devType = DEVICE_TYPE_ATA;
//   memcpy(disk_info.serialNum, id->serialNum, sizeof (disk_info.serialNum));
//   memcpy(disk_info.firmwareRev, id->firmwareRev, sizeof (disk_info.firmwareRev));
//   memcpy(disk_info.modelNum, id->modelNum, sizeof (disk_info.modelNum));
// looks like linux does the byte flipping for you
for (unsigned int i = 0; i < sizeof (disk_info.serialNum); i += 2) {
    disk_info.serialNum[i] = id->serialNum[i + 1];
    disk_info.serialNum[i + 1] = id->serialNum[i];
}
for (unsigned int i = 0; i < sizeof (disk_info.firmwareRev); i += 2) {
    disk_info.firmwareRev[i] = id->firmwareRev[i + 1];
    disk_info.firmwareRev[i + 1] = id->firmwareRev[i];
}
for (unsigned int i = 0; i < sizeof (disk_info.modelNum); i += 2) {
    disk_info.modelNum[i] = id->modelNum[i + 1];
    disk_info.modelNum[i + 1] = id->modelNum[i];
}

    free(buffer);
    return;
}
/** Send an ioctl to the device using pass through. */
uint8_t DtaDevLinuxSata::sendCmd_SAS(ATACOMMAND cmd, uint8_t protocol, uint16_t comID,
                         void * buffer, uint32_t bufferlen)
{
    sg_io_hdr_t sg;
    uint8_t sense[32]; // how big should this be??
    uint8_t cdb[12];

    LOG(D1) << "Entering DtaDevLinuxSara::sendCmd_SAS";
    memset(&cdb, 0, sizeof (cdb));
    memset(&sense, 0, sizeof (sense));
    memset(&sg, 0, sizeof (sg));

  
        // initialize SCSI CDB
        switch(cmd)
        {
        default:
        {
            return 0xff;
        }
        case IF_RECV:
        {
            auto * p = (CScsiCmdSecurityProtocolIn *) cdb;
            p->m_Opcode = p->OPCODE;
            p->m_SecurityProtocol = protocol;
            p->m_SecurityProtocolSpecific = htons(comID);
            p->m_INC_512 = 1;
            p->m_AllocationLength = htonl(bufferlen/512);
            break;
        }
        case IF_SEND:
        {
            auto * p = (CScsiCmdSecurityProtocolOut *) cdb;
            p->m_Opcode = p->OPCODE;
            p->m_SecurityProtocol = protocol;
            p->m_SecurityProtocolSpecific = htons(comID);
            p->m_INC_512 = 1;
            p->m_TransferLength = htonl(bufferlen/512);
            break;
        }
        }

        // fill out SCSI Generic structure
        sg.interface_id = 'S';
        sg.dxfer_direction = cmd == IF_RECV ? SG_DXFER_FROM_DEV : SG_DXFER_TO_DEV;
        sg.cmd_len = sizeof (cdb);
        sg.mx_sb_len = sizeof (sense);
        sg.iovec_count = 0;
        sg.dxfer_len = bufferlen;
        sg.dxferp = buffer;
        sg.cmdp = cdb;
        sg.sbp = sense;
        sg.timeout = 60000;
        sg.flags = 0;
        sg.pack_id = 0;
        sg.usr_ptr = NULL;

        // execute I/O
        if (ioctl(fd, SG_IO, &sg) < 0) {
            LOG(D4) << "cdb after ";
            IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
            LOG(D4) << "sense after ";
            IFLOG(D4) DtaHexDump(sense, sizeof (sense));
            return 0xff;
        }
    
        // check for successful target completion
        if (sg.masked_status != GOOD)
        {
            LOG(D4) << "cdb after ";
            IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
            LOG(D4) << "sense after ";
            IFLOG(D4) DtaHexDump(sense, sizeof (sense));
            return 0xff;
        }

        // success
        return 0x00;
    }
    
static void safecopy(uint8_t * dst, size_t dstsize, uint8_t * src, size_t srcsize)
{
    const size_t size = min(dstsize, srcsize);
    if (size > 0) memcpy(dst, src, size);
    if (size < dstsize) memset(dst+size, '\0', dstsize-size);
}

void DtaDevLinuxSata::identify_SAS(OPAL_DiskInfo *disk_info)
{
    sg_io_hdr_t sg;
    uint8_t sense[18];
    uint8_t cdb[sizeof(CScsiCmdInquiry)];

    LOG(D4) << "Entering DtaDevLinuxSata::identify_SAS()";
    uint8_t * buffer = (uint8_t *) aligned_alloc(IO_BUFFER_ALIGNMENT, MIN_BUFFER_LENGTH);

    memset(&cdb, 0, sizeof (cdb));
    memset(&sense, 0, sizeof (sense));
    memset(&sg, 0, sizeof (sg));

    // fill out SCSI command
    auto p = (CScsiCmdInquiry *) cdb;
    p->m_Opcode = p->OPCODE;
    p->m_AllocationLength = htons(sizeof(CScsiCmdInquiry_StandardData));

    // fill out SCSI Generic structure
    sg.interface_id = 'S';
    sg.dxfer_direction = SG_DXFER_FROM_DEV;
    sg.cmd_len = sizeof (cdb);
    sg.mx_sb_len = sizeof (sense);
    sg.iovec_count = 0;
    sg.dxfer_len = MIN_BUFFER_LENGTH;
    sg.dxferp = buffer;
    sg.cmdp = cdb;
    sg.sbp = sense;
    sg.timeout = 60000;
    sg.flags = 0;
    sg.pack_id = 0;
    sg.usr_ptr = NULL;

    // execute I/O
    if (ioctl(fd, SG_IO, &sg) < 0) {
        LOG(D4) << "cdb after ";
        IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
        LOG(D4) << "sense after ";
        IFLOG(D4) DtaHexDump(sense, sizeof (sense));
        disk_info->devType = DEVICE_TYPE_OTHER;
        free(buffer);
        return;
    }

    // check for successful target completion
    if (sg.masked_status != GOOD)
    {
        LOG(D4) << "cdb after ";
        IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
        LOG(D4) << "sense after ";
        IFLOG(D4) DtaHexDump(sense, sizeof (sense));
        disk_info->devType = DEVICE_TYPE_OTHER;
        free(buffer);
        return;
    }

    // response is a standard INQUIRY (at least 36 bytes)
    auto resp = (CScsiCmdInquiry_StandardData *) buffer;
 
    // make sure SCSI target is disk
    if (sg.dxfer_len - sg.resid != sizeof(CScsiCmdInquiry_StandardData)
        || resp->m_PeripheralDeviceType != 0x0)
    {
        LOG(D4) << "cdb after ";
        IFLOG(D4) DtaHexDump(cdb, sizeof (cdb));
        LOG(D4) << "sense after ";
        IFLOG(D4) DtaHexDump(sense, sizeof (sense));
        disk_info->devType = DEVICE_TYPE_OTHER;
        free(buffer);
        return;
    }

    // fill out disk info fields
    safecopy(disk_info->serialNum, sizeof(disk_info->serialNum), resp->m_T10VendorId, sizeof(resp->m_T10VendorId));
    safecopy(disk_info->firmwareRev, sizeof(disk_info->firmwareRev), resp->m_ProductRevisionLevel, sizeof(resp->m_ProductRevisionLevel));
    safecopy(disk_info->modelNum, sizeof(disk_info->modelNum), resp->m_ProductId, sizeof(resp->m_ProductId));

    // device is apparently a SCSI disk
    disk_info->devType = DEVICE_TYPE_SAS;
    isSAS = 1;

    // free buffer and return
    free(buffer);
    return;
}
/** Close the device reference so this object can be delete. */
DtaDevLinuxSata::~DtaDevLinuxSata()
{
    LOG(D1) << "Destroying DtaDevLinuxSata";
    close(fd);
}