Library to use AT commands for the Onethinx Core LoRaWAN module
The following AT commands can be used with this AT commands firmware:
| Command | Response | Description |
|---|---|---|
| AT+RESET | [info] | Resets the module |
| AT+PING | OK | Ping |
| AT+INFO | [info] | Show the info of the module |
| AT+STATUS | [status] | Show the status of the module |
| AT+UNLOCK | OK | Unlocks the module for RAW Radio commands |
| AT+SLEEPMODE [mode] | OK / Error | Set sleepmode |
| Command | Response | Description |
|---|---|---|
| AT+SET_OTAA [keys] | OK / Error | Set OTAA keys |
| AT+JOIN | OK / Error | Join the LoRaWAN network |
| AT+TX [data] | OK / Error | |
| AT+RX_LENGTH | [length] | Show amount of data in the RX buffer |
| AT+RX | [data] | Show received data |
| Command | Response | Description |
|---|---|---|
| AT+RADIO_SET_FREQUENCY [frequency] | OK / Error | Set Radio Frequency |
| AT+RADIO_SET_LORA_MODULATION [mod.settings] | OK / Error | Sets the Radio LoRa Modulation configuration |
| AT+RADIO_SET_LORA_PACKET [packet.settings] | OK / Error | Sets the Radio LoRa Packet configuration. |
| AT+RADIO_SET_FSK_MODULATION [mod.settings] | OK / Error | Sets the Radio FSK Modulation configuration |
| AT+RADIO_SET_FSK_PACKET [packet.settings] | OK / Error | Sets the Radio FSK Packet configuration. |
| AT+RADIO_TX [data] | OK / Error | Send the [data] |
| AT+RADIO_RX [RX timeout in ms] | RX:[data] / OK | Activates the receiver for [timeout ms] |
##Connections:
| Module | Function | To |
|---|---|---|
| P9_0 | Module RX | Host UART TX (TTL level) |
| P9_1 | Module TX | Host UART RX (TTL level) |
| P0_4 | Module wakeup | Host UART TX (TTL level) or external wakeup (falling edge) |
- All commands are terminated by "\n"
- Sleep IO:
- low: enter sleep mode
- high: wake up
- UART settings:
- baudrate 19200
- databits: 8
- parity: N
- stopbits: 1
- All data is in hexadecimal format.
- OTAA keys [keys] format:
- [public network] [DevEUI] [AppEUI] [AppKey]
- public network: 1 or 0 (1 for public network, 0 for private network)
- DevEUI: hexadecimal values 8 byte DevEUI (16 characters)
- AppEUI: hexadecimal values 8 byte AppEUI (16 characters)
- AppKey: hexadecimal values 16 byte AppKey (32 characters)
- Sleep mode [mode] value:
- 0: Hibernate
- 1: Deep Sleep
- 2: Sleep
- Wakeup IO:
- connect to external wakeup signal (voltage may not exceed module voltage) for wakeup on falling edge
- connect to Host TX for wakeup on TX activity
Use this tool to generate the AT Command Settings for LoRa and FSK settings:
-
Set OTAA Keys
- Public network: true (1)
- DevEUI: DE01020304050607
- AppEUI: AE01020304050607
- AppKey: AA0102030405060708090A0B0C0D0E0F
AT+SET_OTAA 1 DE01020304050607 AE01020304050607 AA0102030405060708090A0B0C0D0E0F -
Send data over LoRaWAN
- Data: "Hello World!" (hexadecimal = 48656c6c6f20576f726c6421)
AT+TX 48656c6c6f20576f726c6421 -
Enter sleep mode
- mode: Deep Sleep (1)
AT+SLEEPMODE 1