I've tested all "sonodiy" actions, except the 'flash' command. Because I currently have only one device, and flashing it can not be reversed to the factory firmware, so I would'nt be able to make further tests.
It should work asis, if the device accept an external URL, as the default Tasmota one currently configured in the config-sample.php file.
If it fails, it might be necessary to download the firmware directly to a local web server, and then change the URL according to the new location.
-
Try with a local hostname, ie:
http://mycomputer.local/firmare.bin
-
or even directly with an IP address, ie:
http://192.168.0.123/firmare.bin
I would appreciate if you could PLEASE report if it works correcly and what were the exact steps that you tried.
Thank you
I've tested all "sonodiy" actions, except the 'flash' command. Because I currently have only one device, and flashing it can not be reversed to the factory firmware, so I would'nt be able to make further tests.
It should work asis, if the device accept an external URL, as the default Tasmota one currently configured in the config-sample.php file.
If it fails, it might be necessary to download the firmware directly to a local web server, and then change the URL according to the new location.
Try with a local hostname, ie:
http://mycomputer.local/firmare.binor even directly with an IP address, ie:
http://192.168.0.123/firmare.binI would appreciate if you could PLEASE report if it works correcly and what were the exact steps that you tried.
Thank you