Jose hits Chris with the "now that you have your device info"

Good news you received a Pocket P.C.!

Welcome to the club!

Here are some instructions.

The power port is the one on the bottom left with the screen facing toward you. You can use that port for FEL mode or connecting the included charger.

1.) Do not leave the RGB backlight on while charging. You can turn it on and off by pressing the FN key + the button with the lightbulb on the bottom right.
2.) The HDMI port will not work.
3.) The EMMC is not programmed. A microSD card is provided with a buildroot factory test image. We hope to share various distribution images soon with you that you can flash to the emmc.
4.) Your unit does not have a GNSS module but it does have a LoRa module.
5.) The Black Magic Probe does not have the application firmware flashed to it only the bootloader. You can use dfu-util to program it. I'll provide instructions on how to do that.
6.) Use only the charger provided if you can or connect it directly to a computer. Do not use another charger. (We have not completed the USB PD driver.)

The system controller has very basic functionality and it does not have the finalized firmware.
Please take care when charging and using the device to prevent it from overheating.

Recently Martijn Braam got PostmarketOS booting on Pocket P.C. I'll try to get you an image so that you can try that.

We will soon have Arch Linux, Fedora, Debian and Mobian booting on it.