# escape=`

# -----------------------------------------------------------------------------------------

# This file describes the standard way to build Docker in a container on Windows

# Server 2016 or Windows 10.

#

# Maintainer: @jhowardmsft

# -----------------------------------------------------------------------------------------

# Prerequisites:

# --------------

#

# 1. Windows Server 2016 or Windows 10 with all Windows updates applied. The major

# build number must be at least 14393. This can be confirmed, for example, by

# running the following from an elevated PowerShell prompt - this sample output

# is from a fully up to date machine as at mid-November 2016:

#

# >> PS C:\> $(gin).WindowsBuildLabEx

# >> 14393.447.amd64fre.rs1_release_inmarket.161102-0100

#

# 2. Git for Windows (or another git client) must be installed. https://git-scm.com/download/win.

#

# 3. The machine must be configured to run containers. For example, by following

# the quick start guidance at https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start or

# https://github.com/docker/labs/blob/master/windows/windows-containers/Setup.md

#

# 4. If building in a Hyper-V VM: For Windows Server 2016 using Windows Server

# containers as the default option, it is recommended you have at least 1GB

# of memory assigned; For Windows 10 where Hyper-V Containers are employed, you

# should have at least 4GB of memory assigned. Note also, to run Hyper-V

# containers in a VM, it is necessary to configure the VM for nested virtualization.

# -----------------------------------------------------------------------------------------

# Usage:

# -----

#

# The following steps should be run from an (elevated*) Windows PowerShell prompt.

#

# (*In a default installation of containers on Windows following the quick-start guidance at

# https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start,

# the docker.exe client must run elevated to be able to connect to the daemon).

#

# 1. Clone the sources from github.com:

#

# >> git clone https://github.com/docker/docker.git C:\go\src\github.com\docker\docker

# >> Cloning into 'C:\go\src\github.com\docker\docker'...

# >> remote: Counting objects: 186216, done.

# >> remote: Compressing objects: 100% (21/21), done.

# >> remote: Total 186216 (delta 5), reused 0 (delta 0), pack-reused 186195

# >> Receiving objects: 100% (186216/186216), 104.32 MiB | 8.18 MiB/s, done.

# >> Resolving deltas: 100% (123139/123139), done.

# >> Checking connectivity... done.

# >> Checking out files: 100% (3912/3912), done.

# >> PS C:\>

#

#

# 2. Change directory to the cloned docker sources:

#

# >> cd C:\go\src\github.com\docker\docker

#

#

# 3. Build a docker image with the components required to build the docker binaries from source

# by running one of the following:

#

# >> docker build -t nativebuildimage -f Dockerfile.windows .

# >> docker build -t nativebuildimage -f Dockerfile.windows -m 2GB . (if using Hyper-V containers)

#

#

# 4. Build the docker executable binaries by running one of the following:

#

# >> $DOCKER_GITCOMMIT=(git rev-parse --short HEAD)

# >> docker run --name binaries -e DOCKER_GITCOMMIT=$DOCKER_GITCOMMIT nativebuildimage hack\make.ps1 -Binary

# >> docker run --name binaries -e DOCKER_GITCOMMIT=$DOCKER_GITCOMMIT -m 2GB nativebuildimage hack\make.ps1 -Binary (if using Hyper-V containers)

#

#

# 5. Copy the binaries out of the container, replacing HostPath with an appropriate destination

# folder on the host system where you want the binaries to be located.

#

# >> docker cp binaries:C:\go\src\github.com\docker\docker\bundles\docker.exe C:\HostPath\docker.exe

# >> docker cp binaries:C:\go\src\github.com\docker\docker\bundles\dockerd.exe C:\HostPath\dockerd.exe

#

#

# 6. (Optional) Remove the interim container holding the built executable binaries:

#

# >> docker rm binaries

#

#

# 7. (Optional) Remove the image used for the container in which the executable

# binaries are build. Tip - it may be useful to keep this image around if you need to

# build multiple times. Then you can take advantage of the builder cache to have an

# image which has all the components required to build the binaries already installed.

#

# >> docker rmi nativebuildimage

#

# -----------------------------------------------------------------------------------------

# The validation tests can only run directly on the host. This is because they calculate

# information from the git repo, but the .git directory is not passed into the image as

# it is excluded via .dockerignore. Run the following from a Windows PowerShell prompt

# (elevation is not required): (Note Go must be installed to run these tests)

#

# >> hack\make.ps1 -DCO -PkgImports -GoFormat

# -----------------------------------------------------------------------------------------

# To run unit tests, ensure you have created the nativebuildimage above. Then run one of

# the following from an (elevated) Windows PowerShell prompt:

#

# >> docker run --rm nativebuildimage hack\make.ps1 -TestUnit

# >> docker run --rm -m 2GB nativebuildimage hack\make.ps1 -TestUnit (if using Hyper-V containers)

# -----------------------------------------------------------------------------------------

# To run unit tests and binary build, ensure you have created the nativebuildimage above. Then

# run one of the following from an (elevated) Windows PowerShell prompt:

#

# >> docker run nativebuildimage hack\make.ps1 -All

# >> docker run -m 2GB nativebuildimage hack\make.ps1 -All (if using Hyper-V containers)

# -----------------------------------------------------------------------------------------

# Important notes:

# ---------------

#

# Don't attempt to use a bind mount to pass a local directory as the bundles target

# directory. It does not work (golang attempts for follow a mapped folder incorrectly).

# Instead, use docker cp as per the example.

#

# go.zip is not removed from the image as it is used by the Windows CI servers

# to ensure the host and image are running consistent versions of go.

#

# Nanoserver support is a work in progress. Although the image will build if the

# FROM statement is updated, it will not work when running autogen through hack\make.ps1.

# It is suspected that the required GCC utilities (eg gcc, windres, windmc) silently

# quit due to the use of console hooks which are not available.

#

# The docker integration tests do not currently run in a container on Windows, predominantly

# due to Windows not supporting privileged mode, so anything using a volume would fail.

# They (along with the rest of the docker CI suite) can be run using

# https://github.com/jhowardmsft/docker-w2wCIScripts/blob/master/runCI/Invoke-DockerCI.ps1.

#

# -----------------------------------------------------------------------------------------

# The number of build steps below are explicitly minimised to improve performance.

FROM microsoft/windowsservercore

# Use PowerShell as the default shell

SHELL ["powershell", "-Command", "$ErrorActionPreference = 'Stop'; $ProgressPreference = 'SilentlyContinue';"]

# Environment variable notes:

# - GO_VERSION must be consistent with 'Dockerfile' used by Linux.

# - FROM_DOCKERFILE is used for detection of building within a container.

ENV GO_VERSION=1.10.3 `

GIT_VERSION=2.11.1 `

GOPATH=C:\go `

FROM_DOCKERFILE=1

RUN `

Function Test-Nano() { `

$EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId; `

return (($EditionId -eq 'ServerStandardNano') -or ($EditionId -eq 'ServerDataCenterNano') -or ($EditionId -eq 'NanoServer')); `

}`

`

Function Download-File([string] $source, [string] $target) { `

if (Test-Nano) { `

$handler = New-Object System.Net.Http.HttpClientHandler; `

$client = New-Object System.Net.Http.HttpClient($handler); `

$client.Timeout = New-Object System.TimeSpan(0, 30, 0); `

$cancelTokenSource = [System.Threading.CancellationTokenSource]::new(); `

$responseMsg = $client.GetAsync([System.Uri]::new($source), $cancelTokenSource.Token); `

$responseMsg.Wait(); `

if (!$responseMsg.IsCanceled) { `

$response = $responseMsg.Result; `

if ($response.IsSuccessStatusCode) { `

$downloadedFileStream = [System.IO.FileStream]::new($target, [System.IO.FileMode]::Create, [System.IO.FileAccess]::Write); `

$copyStreamOp = $response.Content.CopyToAsync($downloadedFileStream); `

$copyStreamOp.Wait(); `

$downloadedFileStream.Close(); `

if ($copyStreamOp.Exception -ne $null) { throw $copyStreamOp.Exception } `

} `

} else { `

Throw ("Failed to download " + $source) `

}`

} else { `

$webClient = New-Object System.Net.WebClient; `

$webClient.DownloadFile($source, $target); `

} `

} `

`

setx /M PATH $('C:\git\cmd;C:\git\usr\bin;'+$Env:PATH+';C:\gcc\bin;C:\go\bin'); `

`

Write-Host INFO: Downloading git...; `

$location='https://www.nuget.org/api/v2/package/GitForWindows/'+$Env:GIT_VERSION; `

Download-File $location C:\gitsetup.zip; `

`

Write-Host INFO: Downloading go...; `

Download-File $('https://golang.org/dl/go'+$Env:GO_VERSION+'.windows-amd64.zip') C:\go.zip; `

`

Write-Host INFO: Downloading compiler 1 of 3...; `

Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/gcc.zip C:\gcc.zip; `

`

Write-Host INFO: Downloading compiler 2 of 3...; `

Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/runtime.zip C:\runtime.zip; `

`

Write-Host INFO: Downloading compiler 3 of 3...; `

Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/binutils.zip C:\binutils.zip; `

`

Write-Host INFO: Extracting git...; `

Expand-Archive C:\gitsetup.zip C:\git-tmp; `

New-Item -Type Directory C:\git | Out-Null; `

Move-Item C:\git-tmp\tools\* C:\git\.; `

Remove-Item -Recurse -Force C:\git-tmp; `

`

Write-Host INFO: Expanding go...; `

Expand-Archive C:\go.zip -DestinationPath C:\; `

`

Write-Host INFO: Expanding compiler 1 of 3...; `

Expand-Archive C:\gcc.zip -DestinationPath C:\gcc -Force; `

Write-Host INFO: Expanding compiler 2 of 3...; `

Expand-Archive C:\runtime.zip -DestinationPath C:\gcc -Force; `

Write-Host INFO: Expanding compiler 3 of 3...; `

Expand-Archive C:\binutils.zip -DestinationPath C:\gcc -Force; `

`

Write-Host INFO: Removing downloaded files...; `

Remove-Item C:\gcc.zip; `

Remove-Item C:\runtime.zip; `

Remove-Item C:\binutils.zip; `

Remove-Item C:\gitsetup.zip; `

`

Write-Host INFO: Creating source directory...; `

New-Item -ItemType Directory -Path C:\go\src\github.com\docker\docker | Out-Null; `

`

Write-Host INFO: Configuring git core.autocrlf...; `

C:\git\cmd\git config --global core.autocrlf true; `

`

Write-Host INFO: Completed

# Make PowerShell the default entrypoint

ENTRYPOINT ["powershell.exe"]

# Set the working directory to the location of the sources

WORKDIR C:\go\src\github.com\docker\docker

# Copy the sources into the container

COPY . .