05/15/2022

- 3.5.1 released

- Fix validation of TSIG signed responses (#249)

- DS rdata digest validation hexadecimal digits (#252)

02/05/2022

- 3.5.0 released

- Add full built-in support for DNSSEC based on dnssecjava (#209)

- Make Record classes serializable again (#242)

- Allow SVCB ServiceMode records without params

(#244, @adam-stoler)

- Fix TCPClient receive timeouts

(#218 @nguydavi, #219)

12/05/2021

- 3.4.3 released

- Fix handling of buffers in DNSInput

(#224, #225 @nresare)

- Clear existing nameservers on config refresh (#226)

- Fix exception when calling ResolverConfig.refresh (#234)

09/19/2021

- 3.4.2 released

- Document behavior of ExtendedResolver.setTimeout (#206)

- Add overloads to use an Executor when sending queries in

resolvers (#211)

- Remove synchronous locks in DoH Resolver (related to #211)

- Fix broken CNAME handling in LookupSession (#212)

- "WireParseException: bad label type" when parsing Message

from ByteBuffer (#213)

- Remove unnecessary synchronization in org.xbill.DNS.Header::getID

(#215, @maltalex)

- Add examples for the LookupSession and direct Resolver usage

07/30/2021

- 3.4.1 released

- Allow signing with ED25519 and ED448 algorithms

(#200, Klaus Malorny)

- Rename echconfig to ech in SVCB/HTTPS records

(#202, @adam-stoler)

- Fix bug in Name.compareTo with byte-values >= 128

(#205, @adam-stoler)

06/09/2021

- 3.4.0 released

- UnknownHostException provides details in message (#154)

- Limit length of relative Name to 254 (#165)

- Fix wildcard lookups in Zone (#169)

- Properly close UDP channel upon error

(#177, Walter Scott Johnson)

- Fix load balancing in ExtendedResolver

(#179, Paulo Costa)

- Add method to shutdown NIO threads (#180)

- Fix restoring active position on byte buffers

(#184, @ryru)

- Add support for extended DNS errors (RFC8914, #187)

- Fix TTL for SOA record to minimum of TTL and minimum field

(#191, @amitknx)

- Add support for hosts file in lookups (#195)

10/28/2020

- 3.3.1 released

- Fix value of getAlias in C/DNameRecord (#136)

- Fix bug with SVCB/HTTPS parsing of master file format

(PR#135, @adam-stoler)

09/27/2020

- 3.3.0 released

- Add support for SVCB and HTTPS records

(PR#116, @adam-stoler)

- Fix an issue with ndots in Lookup (#118)

- Support IPv4 mapped IPv6 address in AAAA record

(PR#120, @spwei)

- Validate range in Type

- Improve DOH Resolver (#123, #127)

Note that this resolver is more a proof of concept and not

production ready. See Javadoc and issue #123.

07/11/2020

- 3.2.2 released

- Fix JNA access violation in WindowsResolverConfigProvider

on 32bit JVMs

06/22/2020

- 3.2.1 released

- Include sources and Javadoc

06/22/2020

- 3.2.0 released

- Add Javadoc @since tags for APIs introduced since 3.0

- Fix requiring JNA in certain classloaders (#112)

- Add property to skip initializing builtin resolver config (#112)

- Make ResolverConfig and Resolver API public (#111)

- Add properties for a fallback resolver config provider (#111)

- Close UDP socket on failures (#110)

- Refactor TSIG code and add trace logging (#109)

05/15/2020

- 3.1.0 released

- Fix order of OPT and TSIG records in messages (#108)

- Fix RRset.cycle() short overflows (#102)

- Fix race condition in resolver I/O (#104)

- Add support for custom record types

(#94, Klaus Malorny <[email protected]>)

03/19/2020

- 3.0.2 released

- Only select for tcp write when there is something to write

(PR#96, Rouzbeh Delavari)

02/23/2020

- 3.0.1 released

- Fix toString of RRset reporting empty when it contains signatures

- Fix a potential sorting bug when creating a DNSSEC digest

- Fix getting the resolvers of an ExtendedResolver (#92)

02/15/2020

- 3.0.0 released

- Parse RRsig records with epoch time format

- Add support for EdDSA DNSSEC signatures if BouncyCastle is available

(Ed25519 and Ed448, RFC 8080)

- Add missing RCode, OpCode and RR type mnemonics

01/19/2020:

- 3.0.0-next.1 released

- Requires Java 8 and slf4j-api

- Adds support for Java 9+ and Android O+ via a new server config

lookup system (#6, #9,

- Resolving is now fully asynchronous, no new thread per query anymore

- Message provides information about the resolver that produced it (#41)

- Add support for Host Identity Protocol (HIP) records (RFC 8005, #47)

- Adds a DNS over HTTP (DoH) resolver (#66)

- Fixes some issues with the OSGi manifest (#70)

- Add support for the RES_OPTIONS environment variable (#57)

- Add support for relative $INCLUDE paths in master files (#75)

- Add support for custom DNS server port in config properties (#80)

- Adds new EDNS(0) options

- See the README for hints on migrating from v2.1.x to v3

05/25/2019:

- 2.1.9 released

- Fix getRRsetType for empty RRSIG records.

(PR#40, Klaus Malorny <[email protected]>)

05/23/2019:

- Fix NPE during NameService registration.

(PR#26, Kenny Ingle <[email protected]>)

- Add japicmp Maven plugin for compatibility checks.

(PR#36, Kenny Ingle <[email protected]>)

- Fix parsing/generation of (EC)DSA signatures from/to DER.

- Fix miscount in Message.sectionToWire related to OPT records.

(PR#37, Klaus Malorny <[email protected]>)

- Add support for the CDS and CDNSKEY record types.

05/18/2019:

- Primary maintainer is now Ingo Bauersachs ([email protected])

- Move project from Sourceforge to Github.

- Cleanup Maven POM.

- Add CI und Code Coverage tools.

- Add Javadoc-Badge.

(PR#27, Kenny Ingle <[email protected]>)

10/13/2018:

- Fix Javadoc nits (David Xia <[email protected]>)

3/20/2017:

- Change the number of CNAMEs that the Lookup code will follow,

as the previous limit (6) was not enough for www.paypal.com.

(reported by George Nikolaidis <[email protected]>)

1/3/2017:

- 2.1.8 released

8/13/2016:

- Add a Message constructor taking a ByteBuffer, and convert the

DNSInput class to use a ByteBuffer internally.

(patch from Marrache Mickael <[email protected]>)

- Add support for the OPENPGPKEY record.

(patch from Valentin Hauner <[email protected]>)

- Add support for the SMIMEA record.

11/25/2015:

- Add support for the CAA record.

8/21/2015:

- Convert the TSIG code from using a custom HMAC implementation to

the one in javax.crypto.Mac.

(patch from Nick Sayer <[email protected]>)

4/21/2015:

- Update the URI record implementation to match the latest spec.

(patch from Anthony Kirby <[email protected]>)

2/15/2015

- 2.1.7 released

2/14/2015

- Attempt to deal with Java's poor handling of IPv4-mapped IPv6

addresses. (reported by Keshav Badruka <[email protected]>)

12/23/2014

- Add an interface for logging sent/received packets.

(based on a patch from Damian Minkov <[email protected]>)

- Add support for the URI record.

(patch from Anthony Kirby <[email protected]>)

12/22/2014

- Fix message truncation to preserve the OPT record.

(based on a patch from Klaus Malorny <[email protected]>)

- Properly deal with short DSA and ECDSA keys. (original patch from

Marcos Sanz <[email protected]>, with some local modifications)

- Add support for GOST (RFC 5933) to DNSSEC. Using GOST requires an

external cryptography provider, such as BouncyCastle.

(original patch from Marcos Sanz <[email protected]>, with some

local modifications)

- Change the OPTRecord equals() method to check TTL, since the TTL

field holds relevant information. (based on a patch from

Dr. Christian Möller <[email protected]>)

- Printing an empty RRset would incorrectly throw an exception.

10/14/2013

- 2.1.6 released

- Address.getByName() and Address.getAllByName() had incomplete IPv6

support; they wouldn't issue AAAA queries.

(reported by Cédric Braem <[email protected]>)

10/07/2013

- Improve the name server detection code for Android.

(patch from Florian Schmaus <[email protected]>, based on

stackoverflow.com/a/11362271/194894).

08/07/2013

- Change the edns-client-subnet option to use the officially defined

option code.

07/29/2013

- SIG(0) signatures were incorrectly generated in some cases.

(patch from Tekto <[email protected]>)

- Add NoSignature exception, thrown when attempting to validate a

SIG(0) in a message without one.

05/04/2013

- The Name(String s, Name origin) constructor copies too many labels

when origin has been created by stripping a label.

(patch from Ingo Bauersachs <[email protected]>)

04/10/2013

- Fix Name.isAbsolute() to check that the length of the last label is

0, not that the last byte of the name is 0.

04/10/2013

- 2.1.5 released

03/18/2013

- Fix DS generation to canonicalize the DNSKEY owner name.

(patch from Ingo Bauersachs <[email protected]>)

02/19/2013

- Add Name.canonicalize() and Name.toString() variant for omitting the

final dot in an absolute name.

01/04/2013

- 2.1.4 released

10/25/2012

- Fix the Message constructor to not raise a ClassCastException when a

SIG or TSIG record is seen in the question section.

(patch from Klaus Malorny <[email protected]>)

9/4/2012

- Add support for RFC 6605: Elliptic Curve Digital Signature

Algorithm (DSA) for DNSSEC. (original patch from

Marcos Sanz <[email protected]>, with some local modifications)

8/31/2012

- Add support for the TLSA record type.

- Pass hostnames to InetAddress.getByAddress where possible.

(patch from Ingo Bauersachs <[email protected]>)

11/15/2011

- Fix the ZoneTransferIn object to properly report AXFRs; this was

broken by the changes in 2.1.3.

(reported by Thomas Corte <[email protected]>)

11/3/2011

- Update DSRecord constructor from DNSKEYRecord to generate the

correct digest.

(patch from Marty Kube <[email protected]>)

- Also update the signature of the DSRecord constructor from

DNSKEYRecord to not take the key's footprint as a parameter, as it

can be derived from the key.

10/24/2011

- 2.1.3 released

10/17/2011

- Add a callback interface to ZoneTransferIn.

(based on a patch from Nick Sayer <[email protected]>)

10/10/2011

- An exception could be thrown when attempting to look up data in the

cache for type ANY when there were only previously cached

NOERROR/NODATA responses for that name.

(reported by Niel de Wet <[email protected]>)

7/24/2011

- 2.1.2 released

6/9/2011

- TypeBitmap.toString() failed if no bits were set.

(patch from Jeffrey Damick <[email protected]>)

5/24/2011

- TSIG.fromString() didn't handle base64-encoded secrets with /

characters. (reported by Sten <[email protected]>)

5/12/2011

- Support verifying truncated TSIG signatures, as specified in RFC

4635.

5/10/2011

- Refactor EDNS Option support to allow for custom type

implementations, and add support for the Client Subnet option.

(based on a patch from Ming Zhou <[email protected]>)

- Add support for the NSID EDNS option.

4/20/2011

- Add missing support for the HMAC-SHA224, HMA-SHA384, and HMAC-SHA384

TSIG algorithms. (patch from Thomas Corte <[email protected]>)

3/9/2011

- Add support for using alternate JCA providers when generating DNSSEC

signatures (patch from Jeffrey Damick <[email protected]>)

2/9/2011

- 2.1.1 released

2/3/2011

- Add the ability to set ndots on Lookup objects, and parse the ndots

option from a resolv.conf file (patch from Oleg Tsvinev

<[email protected]>).

2/3/2011

- The 'file' command in the 'update' program didn't work correctly.

(reported by Olafur Gudmundsson <[email protected]>)

9/15/2010

- Change the Android name server detection mechanism to avoid false

positives. (patch from Ulf Dittmer)

9/9/2010

- The IXFR code didn't do serial number arithmetic correctly, and would

fail if the serial number wrapped.

(patch from Alexis MacFarlane <[email protected]>)

9/7/2010

- 2.1.0 released

8/17/2010

- When rendering a message, if records from the additional section did

not fit, the header counts were not properly updated.

(patch from Klaus Malorny <[email protected]>)

7/22/2010

- Fix LOC record parsing to allow negative altitudes.

(based on a patch from William Kocik <[email protected]>)

7/21/2010

- The changes to TSIG verification in 2.0.6 didn't work correctly for

stream verification; specifically, the state was only set on the

first Message in the stream.

(reported by William Kocik <[email protected]>)

5/12/2010

- Add support for determining resolver configuration on

Japanese Windows. (translation and original patch from

Brett Wooldridge <[email protected]>)

5/6/2010

- Add support for building an OSGi bundle (patch from

Markus Alexander Kuppe <[email protected]>).

5/2/2010

- Rewrite DNSSEC support.

4/15/2010

- Fix a hang that could occur when using the dnsjava service provider

on Windows (initial patch from <[email protected]>).

11/21/2009

- 2.0.8 released

11/10/2009

- Fix the conversion of NSEC/NSEC3 bitmaps into wire format.

(Klaus Malorny <[email protected]>, also reported by

Tom <[email protected]>).

10/01/2009

- Properly initialize the Date objects used in RRSIG (and other)

records, so that any unused fields are cleared.

(Klaus Malorny <[email protected]>)

9/25/2009

- 2.0.7 released

- Add support for detecting the configured nameservers on the Android

platform. (patch from Arnt Gulbrandsen <[email protected]>)

9/16/2009

- When determining the nameservers to use, if the

sun.net.dns.ResolverConfiguration class returns an empty list, ignore

it. (based on an anonymous patch).

- Make the Name, Record (and all subclasses), RRset, and Zone classes

implement Serializable.

(based on a patch from Patrick <[email protected]>)

9/15/2009

- Add a constant for the REVOKE DNSKEY flag.

(patch from Wolfgang Nagele <[email protected]>)

- ReverseMap.fromAddress(String) should support both IPv4 and IPv6

addresses.

(reported by Stephan Fuhrmann <[email protected]>)

8/08/2009

- The escaping code for text strings should not escape semicolons.

6/23/2009

- DNSSEC signature validation incorrectly used the TTL of the records

being verified, not the original TTL from the RRSIG record, which

caused failures when verifying records returned by a caching server.

(reported by Samuel Benz <[email protected]>)

6/15/2009

- Change the ResolverConfig.refresh() method to only synchronize the

assignment to currentConfig, not the code which determines the new

configuration.

6/12/2009

- The TSIG verification routines (TSIG.verify,

TSIG.StreamVerifier.verify() now update the Message object with the

status of the verification in addition to returning the status.

6/03/2009

- The lists of servers and searchlist entries in ResolverConfig should

not be static.

(Isabelle Dalmasso <[email protected]>)

5/28/2009

- The canonical form of an NSEC record was incorrectly computed - the

next name should not have its case changed.

(David Blacka <[email protected]>)

- Add support for NSEC3, NSEC3PARAM, and DLV records.

(based on a patch from David Blacka <[email protected]>)

9/17/2008

- Fix LOC record rounding.

(reported by Klaus Malorny <[email protected]>)

8/22/2008

- Type 4 NXDOMAIN responses were incorrectly cached as referrals.

(reported by Luis Silva <[email protected]>)

8/06/2008

- Randomize the UDP source ports for outgoing queries.

(based on a patch from Derek Morr <[email protected]>)

4/25/2008

- Add support for the DHCID record.

4/18/2008

- The prior change to allow creating Zones from AXFR-style IXFR

ZoneTransferIn responses didn't work.

- Update the service provider to work with Java 1.6 and earlier

versions. (patch from <[email protected]>)

2/19/2008

- The Zone.removeRecord() method threw an exception if there were no

other records in the same RRset.

(reported by Yoyo Chen <[email protected]>)

- Parsing and formatting LOC records should not depend on the current

locale. (reported by Klaus Malorny <[email protected]>)

1/31/2008

- When converting messages to wire format, don't include name

compression pointers greater than 2^14 - 1.

(reported by Carole Gill <[email protected]>)

1/24/2008

- 2.0.6 released

1/22/2008

- Fix an off-by-2 error that could cause an infinite loop when

parsing a Name with a self-referential compression pointer.

(reported by Carole Gill <[email protected]>)

- Raise an exception when an invalid label type is seen in a wire

format name. The previous behavior would incorrectly parse invalid

names, and could lead to infinite loops.

(reported by Carole Gill <[email protected]>)

8/28/2007

- 2.0.5 released

- Add the ZoneTransferIn.setLocalAddress() method. (based on a patch

from <[email protected]>)

- Build jar file with -source and -target options to provide

compatibility with older Java releases (that is, revert to

pre-2.0.4 behavior).

(reported by Stefano Bagnara <[email protected]>)

8/26/2007

- 2.0.4 released

- Update SPI code to work with java 6.

- Fix an argument parsing bug in the dig program, where failure to

specify both type and class would cause the specified server to

be ignored.

(reported by Stefano Bagnara <[email protected]>)

6/12/2007

- The SPFRecord constructors incorrectly created records whose

internal type field was TXT, not SPF.

(reported by Stefano Bagnara <[email protected]>)

3/7/2007

- Message.getQuestion() incorrectly handled the case where the

question section was represented by an empty list.

(reported by Karl Auer <[email protected]>)

2/15/2007

- Properly obey timeouts in TCPClient code when the message is

read in multiple chunks. (based on a patch from

Francesco Vivoli <[email protected]>)

12/4/2006

- A cache lookup for a record would incorrectly return a delegation

when records for both the queried type and NS were present.

(reported by yosukear <[email protected]>)

11/28/2006

- 2.0.3 released

11/27/2006

- The Zone.fromXFR() method should be able to create zones

from AXFR-style IXFR responses.

(Bill Kuker <[email protected]>)

10/25/2006

- Make the routines that convert between the DNS and standard Java

representations of DSA signatures public.

(suggested by Klaus Malorny <[email protected]>)

8/3/2006

- Add a TSIG constructor that takes an algorithm as a String.

- Add support to TSIG.fromString() for specifying an algorithm.

7/30/2006

- When converting a PublicKey to a DNS record, allow the algorithm

to be specified, as RSA keys can be either of the RSA-SHA1 or

RSA-MD5 algorithms (based on a patch from

Eric <[email protected]>)

- When converting a PublicKey to a DNS record, allow the type (KEY

or DNSKEY) to be specified.

- Update the DNSSECVerifier code to use DNSKEY records, not KEY

records.

7/30/2006

- Added support for parsing the output of ipconfig in French .

(Frederic Bazin <fbazin@users sourceforge.net>)

7/30/2006

- If both "search" and "domain" lines are present in a resolv.conf

file, the domain line should be ignored.

7/26/2006

- Add support for the SPF record type.

7/21/2006

- DNSSEC.digestRRset could digest records in the wrong order.

(reported by David Blacka <[email protected]> and

Mahendra Jain <[email protected]>)

6/26/2006

- 2.0.2 released.

6/22/2006

- Add support for the IPSECKEY record type.

5/18/2006

- The result of a Lookup that involves a CNAME should include

the queried name as one of the aliases, not the CNAME target.

(Jon Lachelt <[email protected]>)

2/13/2006

- Loading zones containing RRsets with multiple records didn't work.

(reported by Olafur Gudmundsson" <[email protected]>)

1/24/2006

- AXFR requests could leak file descriptors if the connection

failed. (Can Bican <[email protected]>)

11/30/2005

- Add a Resolver.setTimeout(int secs, int msecs) method.

(requested by Dmitry Isakbayev) <[email protected]>)

11/30/2005

- 2.0.1 released.

11/11/2005

- The InetAddresses returned by Address.getByName() should have their

hostname copied from the input parameter.

(reported by Praveen Tammana <[email protected]>)

11/7/2005

- Update remaining DNSSEC code to be compliant with the current spec.

11/6/2005

- Add a Resolver.setEDNS(int level, int payloadSize, int flags,

List options) method, to allow a Resolver to automatically set

the DO flag, as well as future EDNS features.

(requested by Rick Wesson <[email protected]>)

10/25/2005

- The Master(InputStream in, Name origin) constructor should not

always fail.

- Correctly handle the case where reading a Master from an InputStream

would throw a NullPointerException if a $INCLUDE file wasn't found.

(reported by Lars Petrus <[email protected]>)

8/22/2005

- Add Address.getByAddress(String) and

Address.getByAddress(String, family).

7/21/2005

- Zone.findExactMatch() would throw a NullPointerException if the

name didn't exist.

(reported by Hans Zandbelt <[email protected]>)

7/19/2005

- Add support for binding clients to local addresses when using

a SimpleResolver. Also add the -b option to the dig program

to test this. (based on a patch by Bruno Dillenseger)

7/5/2005

- Add support to ResolverConfig for using the undocumented

sun.net.dns.ResolverConfiguration class to determine the list

of nameservers and search path; make this the default when

it works (Yannick Meudal <[email protected]>).

6/16/2005

- The inbound zone transfer code failed to treat port 0 as the

default as it claimed to. (Bill Kuker <[email protected]>)

6/15/2005

- When doing a zone transfer with a SimpleResolver object, the

timeout was not properly obeyed.

(reported by Peter Bryant <[email protected]>)

6/5/2005

- Explictly register record type implementations instead of

using reflection; this should prevent hard to diagnose

problems resulting from partial compilation.

5/31/2005

- 2.0.0 released.

5/16/2005

- Fix the code to deal with TTL 0 data in the Cache.

5/15/2005

- Add unit tests for many classes. The unit tests are located

in the tests directory, which mirrors the org.xbill.DNS hierarchy.

(Matt Rutherford <[email protected]>)

5/7/2005

- Fix several problems with empty names.

(Matt Rutherford <[email protected]>)

4/23/2005

- As per RFC 2181, the maximum allowed TTL value is 0x7FFFFFFF.

Change TTL.parseTTL() to reflect this by silently clamping

larger 32 bit values.

4/22/2005

- Attempting to get the name/type/class/ttl of an empty RRset

throws an exception.

4/21/2005

- Remove RRset.getSecurity()/.setSecurity().

4/16/2005

- Change the internal representation of empty records (that is,

records in the question section of a message or meta-records

used in dynamic update).

- Minor cleanups to the Mnemonic class.

(Matt Rutherford <[email protected]>)

4/3/2005

- Change the Cache from being periodically cleaned to being

size-bounded. (based on a patch from several years ago

from Joseph Shraibman <[email protected]>).

- Remove the FindServer class.

- Added a Name Service Provider interface (dns,dnsjava).

(based on code from Paul Cowan <[email protected]>)

4/1/2005

- Use java.nio classes for sockets internally, which provide a

number of improvements, most visibly improved timeouts.

- Remove deprecated dns class.

- Simplify TSIG initialization; remove functions that should

have never existed.

- Remove Cache.setVerifier() and Cache.setSecurePolicy(). There

should be a way of enabling DNSSEC, but the existing code doesn't

work.

- Change the Zone constructors/factory methods to be consistent.

3/29/2005

- Use java.net.InetAddress for IPv6 addresses rather than a custom

class.

3/20/2005

- Fix several bugs in ResolverConfig on Windows.

(Brian McBarron <[email protected]>)

3/15/2005

- Clean up the synchronization in the RRset class

(reported by Daniel Jensen <[email protected]>)

3/8/2005

- Support the BIND misfeature of loading zones with no explicit

TTL by using the SOA minimum field.

3/7/2005

- 1.6.6 released.

3/6/2005

- $GENERATE statements should obey the start field.

3/1/2005

- Add support for HMAC-SHA1 and HMAC-SHA256 TSIG algorithms.

(suggested by Olafur Gudmundsson <[email protected]>)

2/8/2005

- Add infrastructure for parsing the output of ipconfig on

non-English version of windows, and add support for German

and Polish. (based on a patch by Piotr Kochanski)

2/7/2005

- Add Options.refresh() (based on a patch from Th Kuhne)

- Add the ResolverConfig class, which is largely based on the

FindServer class, except that it's not all static methods.

Add the ability to refresh the current ResolverConfig, and

make FindServer use ResolverConfig.

- Add Lookup.refreshDefault (based on a patch from Th Kuhne)

- Truncated messages aren't guaranteed to parse properly, so shouldn't

throw exceptions. (reported by Caleb Richardson <[email protected]>)

- Work around a TCP bug in whatever broken nameserver Enom is using.

(reported by Caleb Richardson <[email protected]>)

2/4/2005

- 1.6.5 released.

- Records of an unknown type and length 0 weren't handled properly.

(reported by Olafur Gudmundsson <[email protected]>)

- Fixed a bug in $INCLUDE handling.

(Christian Sepulveda <[email protected]>)

2/3/2005

- The Lookup.run() method should be usable more than once on a Lookup

object.

(reported by Joseph Shraibman <[email protected]>)

10/31/2004

- Add partial IPv6 support to the ReverseMap class.

(based on a patch from Th Kuhne)

7/7/2004

- Implement the $GENERATE master file directive.

6/28/2004

- Canonicalizing a name created with the Name(Name src, int n)

constructor caused an exception.

(based on a patch from Nigel Tamplin <[email protected]>)

- Concatenating names caused an exception when the prefix was created

with the Name(Name src, int n) constructor.

(reported by Nigel Tamplin <[email protected]>)

6/22/2004

- The DNSSEC digesting code shouldn't throw ClassCastExceptions.

(reported by Mike StJohns <[email protected]>)

- The label count in a generated SIG/RRSIG record was off by one.

(Mike StJohns <[email protected]>)

6/8/2004

- Rcode 4 is NOTIMP, not NOTIMPL.

6/5/2004

- Fixes to LOCRecord.

6/3/2004

- 1.6.4 released.

5/26/2004

- Properly handle text mnemonics in KEY records.

- Add support for the APL record type.

5/25/2004

- Fix a bug where parsing the text format of an NSEC record

incorrectly parsed one token too many.

5/18/2004

- 1.6.3 released.

5/11/2004

- Don't store the number of labels in a Name in a byte, as the maximum

value (128) cannot be stored in a byte.

5/9/2004

- Add support for options within an OPTRecord (loosely based on

a patch from Madhu Siddalingaiah <[email protected]>)

4/18/2004

- Add support for the SSHFP record type.

- Fix a bug in the zone code which would cause record lookups to fail.

4/10/2004

- When parsing paster files, handle the fact that class and ttl may

be in either order.

4/8/2004

- The opcode field in the DNS header was incorrectly parsed; this

would affect messages with opcodes other than QUERY.

(Madhu Siddalingaiah <[email protected]>)

3/20/2004

- 1.6.2 released.

- Lookups could return "referral" instead of "host not found" in some

cases.

3/18/2004

- Fix NullPointerExceptions caused by bad empty Record handling.

(reported by Dharmveer Jain <[email protected]>)

3/16/2004

- 1.6.1 released.

- When loading master files with $INCLUDE statements, the included

files should be opened relative to the current directory, not

the directory of the parent file.

3/12/2004

- Make it possible to use a Tokenizer without leaving files open.

3/4/2004 - 3/12/2004

- Add support for more record types (AFSDB, GPOS, ISDN, MB, MD, MF, MG,

MINFO, MR, NSAP, NSAP-PTR, NULL, PX, RT, WKS, X25).

3/3/2004

- Cached NXDOMAINs were ignored, which caused extra queries to

be sent (reported by Damon Hart-Davis <[email protected]>).

2/25/2004

- Attempting to load a zone without specifying an origin failed.

2/24/2004

- 1.5.2 released.

2/3/2004

- Message.isSigned() should return true if we signed the Message

with a TSIG.

(reported by Shobana Sampath <[email protected]>)

- Implement NSEC, DNSKEY, and RRSIG record types. (loosely based on

a patch from David Blacka <[email protected]>).

- Change the representations of sections, rcodes, opcodes, flags,

and credibility to int.

1/28/2004

- Attempt to better deal with OutOfMemoryErrors when creating

threads during the resolution process.

(reported by Joseph Shraibman <[email protected]>)

1/27/2004

- Change the representation of a TSIG error from a byte to an int.

- Improve error messages from failed Lookups; treat SERVFAIL

as a temporary failure, not an unrecoverable error.

(Joseph Shraibman <[email protected]>)

1/16/2004

- The master file reader should propagate TTLs through $INCLUDE

statements. (David Blacka <[email protected]>)

1/12/2004

- Add a MANIFEST to the jar file containing implementation name and

version. (Harel Efraim <[email protected]>)

1/11/2004

- Fix a couple minor bugs found by FindBugs

(http://www.cs.umd.edu/~pugh/java/bugs/)

1/8/2004

- 1.5.1 released.

- LOC records weren't parsed correctly.

(reported by Harel Efraim <[email protected]>)

- Lines with only whitespace in master files should be ignored.

12/15/2003

- TTLs weren't handled properly in the master file parser.

(Jack Tavares <[email protected]>)

12/11/2003

- 1.5.0 released.

12/8/2003

- Change to the BSD license.

- Replace the deprecated Name(String) and Name(String, Name)

constructors with new versions that properly return exceptions.

12/6/2003

- Make the J2SE javadoc link a property in build.xml. (Ville Skyttä)

11/24/2003

- Lookup should check that the name, type, and class in the question

section of a response match that of the query.

- SimpleResolver should check that the message id of the response

is the same as the message id of the query. On a sufficiently

busy client, sockets can be reused fast enough that late responses

can come in, and should be ignored.

(seen by Joseph Shraibman <[email protected]>)

11/17/2003

- The Lookup code didn't handle CNAMEs pointing at nonexistant names.

(reported by Joseph Shraibman <[email protected]>)

11/11/2003

- Store a weak reference to the Cache in the CacheCleaner thread, and

kill the thread when the Cache is finalized.

(suggested by Joseph Shraibman <[email protected]>)

- When a Lookup uses a null cache, the temporary cache it creates

should not have a CacheCleaner thread.

(based on a suggestion by Joseph Shraibman <[email protected]>)

10/31/2003

- Record.hashCode() didn't return consistent hash codes, and didn't

ignore the TTL (which it should, and which Record.equals() does).

10/27/2003

- DNS TTLs and other 32 bit unsigned values are now represented as

longs, not ints. This is an API change, but allows the full range

to be used.

- Add the Serial class for serial arithmetic.

9/30/2003

- 1.4.3 released.

- Fix a bit of code that required Java 1.4.

9/29/2003

- 1.4.2 released.

9/26/2003

- A Lookup shouldn't die when receiving a referral response; it should

return an error. (reported by Elinor Chang <[email protected]>)

- A Lookup should distinguish between timeouts and other network

errors.

- When parsing IP addresses from text format, treat the presence of

a leading zero on an octet as an error. It's unclear whether

it would be treated as decimal or octal, which means it should

be fixed. (reported by Marcos Sanz/Denic <[email protected]>)

9/17/2003

- Fix an off-by-one error in the Name code; labels of length 63

were not accepted (patch from David Blacka <[email protected]>)

9/2/2003

- 1.4.1 released.

9/1/2003

- The Update.delete(Record) method needs to reset the TTL of the cloned

record to 0. (reported by Edwin R. Rivera <[email protected]>)

8/23/2003

- Change Record.fromString() to expect an EOL/EOF token at the end

of the string, so that extraneous tokens can be detected. The master

file parser was updated to this change.

(noticed by Bob Halley <[email protected]>)

8/22/2003

- Changing TXTRecord.getStrings() from returning a List of Strings

to a List of byte []'s was a bad idea. Change it back, and

add TXTRecord.getStringsAsByteArrays().

(reported by Blake Ramsdell <[email protected]>)

8/21/2003

- 1.4.0 released.

8/20/2003

- Add the ReverseMap class, which contains functions to construct

names to be used in reverse map zones.

8/13/2003

- When looking up a one label unqualified name which fails to match