The NanoSync IV is a small form factor GPS Position, Navigation, Time (PNT) and Frequency reference system that provides multiple reference outputs and includes support for NTP & PTPv2 IEEE 1588-2008. The NanoSync IV has a Rubidium oscillator and can be equipped with a SAASM/M-Code receiver (Rockwell-Collins MPE-S GB-GRAM or Trimble Force 22E MRU) for military users. The NanoSync IV is packaged in a small, rugged enclosure ideally suited for embedded electronic warfare applications.
The NanoSync IV has been demonstrated to be compliant to the Joint Airborne SIGINT Architecture (JASA) Version 3.0, Annex 1, for Time, Frequency, Navigation and Geodesy (TFNG), making it suitable for Electronic Warfare (EW) COMINT and ELINT applications in fixed site, airborne and shipboard environments.

NanoSync IV incorporates proven features designed into all FEI-Zyfer products, including exceptional holdover performance when GPS signals are lost or degraded. This assures continued system operation as a time and frequency reference. The NanoSync IV can be monitored and controlled through an RS-232 port using FEI-Zyfer’s Serial Communication Protocol and via the 10/100Base-TX RJ-45 Ethernet port.

As with all FEI-Zyfer time and frequency products, the NanoSync IV incorporates advanced, proprietary learning algorithms that compensate for external temperature changes and aging characteristics of the oscillator while operating in holdover. This FEI-Zyfer feature ensures accuracy and consistent performance throughout the specified operating temperature range.

FEI-Zyfer, Inc., the leading provider of precision time and frequency reference systems, offers a IEEE 1588-2008 Precision Time Protocol (PTPv2) Dual Port Ethernet, Input/Output Module for our CommSync II® family of systems.

The PTPv2 Modules allow customers to configure new or existing systems to support both PTPv2 and legacy requirements. As with other FEI-Zyfer module options, the modules are hot-swappable and can be configured in any CommSync II, CommSync II-D, GSync or GSync II systems with available slots. The PTPv2 Modules are available in three versions: with an RS-232 Status & Control port, or with a 1 PPS external reference input, or with 1, 5, or 10 MHz external reference inputs via either coaxial or fiber-optic cables.

IEEE 1588 is designed for small LAN’s requiring precise timing and synchronization beyond what can be attained with NTP v4. FEI-Zyfer’s PTPv2 products support the IEEE 1588–2008 (PTP v2) protocol which includes enhancements over previous PTP versions such as transparent clocks for improved accuracy, fault tolerance and faster update rates.

The PTP v2 Modules provide one 10/100Base-T and one 100/1000BaseT IPv4 and IPv6 TCP/IP Ethernet connections. This allows the same Ethernet module to connect to two separate networks for controlling and monitoring of the CommSync II family of systems through Telnet, SSH or SNMP. The PTPv2 modules are configurable as either a PTP Grandmaster or Slave via the system RS-232 port or via the Ethernet port (Telnet). In addition to providing PTP Grandmaster capability, the module also provides (NTP/SNTP) network time service. When referenced to GPS, the PTPv2 Module can also be used as a Network Measurement device, allowing for the monitoring and measuring of PTP Grandmaster performance. Easy to read diagnostic LEDs on the Module provide for immediate visual identification of module status.

The GSync II is the 2U compact version of the popular and versatile GSync, and provides eight output module slots. The heart of the GSync II is the GTF (GPS Time and Frequency) module within the unit. It is self-contained with a Quartz or Rubidium oscillator, and a commercial C/A GPS receiver or a military SAASM/M-Code GPS receiver (Rockwell-Collins MPE-S GB-GRAM or Trimble Force 22E MRU).

If a system needs a Primary Reference Source (PRS), the GSync II provides either Standard Positioning Service (SPS) GPS (the civil C/A signal) or the very latest in GPS military technology—SAASM/M-Code Precision Positioning Service (PPS) GPS receivers
(for approved users only). With GPS as the reference source, the GSync II provides a frequency accuracy of 1E-12 and a time accuracy to < 50 ns Peak to UTC, for calibrated units. The GSync II is also designed to take external inputs to provide internal frequency
synchronization to the accuracy of the external source.

There are two choices of disciplined oscillator selection. An Ovenized Quartz Crystal Oscillator (OCXO) or a Rubidium Atomic Oscillator can be specified. The GSync II can be populated with up to (8) option modules.

There are a wide variety of output option modules available: Low-Phase Noise sine wave, T1/E1, Time Codes, and Network Time Protocol (NTP). The full line of common GSync II and CommSync II option modules are shown in the option module listing on our web site.

For Monitor and Control functions there is an RS-232 communication port on the rear panel of the chassis and a standard Ethernet port providing Telnet, SNMP, and Network Time Protocol (NTP), as well as IEEE PTPv2 IEEE 1588-2008.

FEI-Zyfer products come with a standard 2 year factory warranty (parts & labor).

Part No:

The NanoSync IV Low Profile is a smaller form factor GPS Position, Navigation, Time (PNT) and Frequency reference system that provides multiple reference outputs includes support for NTP & PTPv2 IEEE 1588-2008. The NanoSync IV Low Profile has a OCXO oscillator and is available with a civilian C/A GPS receiver or a SAASM/M-Code GPS receiver for military users. The NanoSync IV is packaged in a small, rugged enclosure ideally suited for embedded electronic warfare applications.

The NanoSync IV has been demonstrated to be compliant to the Joint Airborne SIGINT Architecture (JASA) Version 3.0, Annex 1, for Time, Frequency, Navigation and Geodesy (TFNG), making it suitable for Electronic Warfare (EW) COMINT and ELINT applications in fixed site, airborne and shipboard environments.

NanoSync IV incorporates proven features designed into all FEI-Zyfer products, including exceptional holdover performance when GPS signals are lost or degraded. This assures continued system operation as a time and frequency reference. The NanoSync IV can be monitored and controlled through an RS-232 port using FEI-Zyfer’s Serial Communication Protocol and via the 10/100Base-TX RJ-45 Ethernet port.

As with all FEI-Zyfer time and frequency products, the NanoSync IV incorporates advanced, proprietary learning algorithms that compensate for external temperature changes and aging characteristics of the oscillator while operating in holdover. This FEI-Zyfer feature ensures accuracy and consistent performance throughout the specified operating temperature range.

The NanoSync IV is a small form factor GPS Position, Navigation, Time (PNT) and Frequency reference system that provides multiple reference outputs and includes support for NTP & PTPv2 IEEE 1588-2008. The NanoSync IV has a Rubidium oscillator and is available with a civilian C/A GPS receiver or SAASM/M-Code GPS receiver for military users. The NanoSync IV is packaged in a small, rugged enclosure ideally suited for embedded electronic warfare applications.

The NanoSync IV has been demonstrated to be compliant to the Joint Airborne SIGINT Architecture (JASA) Version 3.0, Annex 1, for Time, Frequency, Navigation and Geodesy (TFNG), making it suitable for Electronic Warfare (EW) COMINT and ELINT applications in fixed site, airborne and shipboard environments.

NanoSync IV incorporates proven features designed into all FEI-Zyfer products, including exceptional holdover performance when GPS signals are lost or degraded. This assures continued system operation as a time and frequency reference. The NanoSync IV can be monitored and controlled through an RS-232 port using FEI-Zyfer’s Serial Communication Protocol and via the 10/100Base-TX RJ-45 Ethernet port.

As with all FEI-Zyfer time and frequency products, the NanoSync IV incorporates advanced, proprietary learning algorithms that compensate for external temperature changes and aging characteristics of the oscillator while operating in holdover. This FEI-Zyfer feature ensures accuracy and consistent performance throughout the specified operating temperature range.

If a system needs a Primary Reference Source (PRS), the GSync provides either Standard Positioning Service (SPS) GPS (the civil C/A signal) or the very latest in GPS military technology – SAASM/M-Code Precision Positioning Service (PPS) GPS receivers (for approved users only). With GPS as the reference source, the GSync provides a frequency accuracy of 1E-12 and a time accuracy of < 50 ns Peak to UTC, for calibrated units.

The GSync is also designed to take external inputs to provide internal frequency synchronization to the accuracy of the external source. There are two choices of disciplined oscillator selection. Depending on holdover requirements, an Ovenized Quartz Crystal Oscillator (OCXO) or a Rubidium Atomic Oscillator can be specified. The GSync can be
populated with up to (4) option modules.

There are a wide variety of output option modules available: Low-Phase Noise sine wave, T1/E1, Time Code, and Network Time Protocol (NTP). The full line of common GSync and CommSync II option modules are shown in the option module listing on our web site.
For Monitor and Control functions there is an RS-232 communication port on the rear panel of the chassis and a standard Ethernet port providing Telnet, SNMP, and Network Time Protocol (NTP), as well as PTPv2 IEEE 1588-2008.

FEI-Zyfer products come with a standard 2 year factory warranty (parts & labor).

The CommSync II-D delivers all the performance and functionality of the CommSync II in a 2U chassis. The heart of the CommSync II-D is the GPS Time and Frequency (GTF) reference module. The GTF is a hot-swappable, front panel plug-in module (with two slots available for redundancy). It is a self-contained module with Quartz Crystal (OCXO) or Rubidium Atomic oscillator options, as well as Civil or SAASM/M-Code MPE-S GB-GRAM, or SAASM/M-Code Force 22E MRU GPS receiver options. Dual Power Supplies and Reference Modules provide redundancy with uninterrupted automatic switchover.

Like our flagship CommSync II, the CommSync II-D provides a frequency accuracy of 1E-12 and a time accuracy of
< 50 ns Peak to UTC.  Additional I/O slots can be utilized by configuring a slaved CommSync II-D with Distribution Time and Frequency (DTF) modules.

For Monitor and Control functions there is an RS-232 communications port on the front panel of the GTF/DTF module, a front panel keypad and display, as well as optional Gigabit Ethernet plug-in modules providing Telnet, SNMP, PTP v2 (1588-2008), and Network Time Protocol. Zyfer Monitor (FEI-Zyfer’s remote access utility) provides complete remote control, including system status, setup, alarm logging and user management over a standard TCP/IP connection.

PRODUCT DESCRIPTION

Utilized as a Primary Reference Source (PRS), the CommSync II provides either Standard Positioning Service (SPS) GPS or the very latest in GPS military technology – SAASM/M-Code Precision Positioning Service (PPS) GPS receivers (for authorized users only).

With GPS as the reference source, the CommSync II provides a frequency accuracy of 1E-12 and a time accuracy of < 50 ns Peak to UTC. Additional I/O slots can be utilized by configuring a slaved CommSync II with Distribution Time and Frequency (DTF) modules.

For Monitor and Control functions there is an RS-232 communications port on the front panel of the GTF/DTF module, a front panel keypad and display, as well as optional Gigabit Ethernet plug-in modules providing Telnet, SNMP, PTP v2 (1588-2008), and NTP. Zyfer Monitor (FEI-Zyfer’s remote access utility) provides complete remote control, including system status, setup, alarm logging and user management over a standard TCP/IP connection.

FEI-Zyfer products come with a standard 2 year factory warranty (parts & labor).