I purchased 25 new Raspberr Pi4 B+ 8Gb. and after 30 minutes of viewing a web page (a list of speeches for an event like this: LiveC - Display ), the screen goes blank for a second, then loops and returns to the initial Anthias screen with logo and IP address. This defect occurs in both horizontal and vertical layouts. It seems like the anomaly that occurs when I view a video in vertical mode, in which the screen first goes blank and then displays the Anthias initial screen with IP, as I specified in the POST that is still open. For now, I’ve solved it by placing two identical assets that change after 20 minutes. But it’s not normal.

2 posts - 2 participants

Read full topic

I try to use nmtui but no succesS

Thanks

4 posts - 3 participants

Read full topic

2 posts - 2 participants

Read full topic

Thank you

5 posts - 4 participants

Read full topic

When I install Anthias using the Raspberry Pi Imager, Anthias loads just fine, but I am unable to open the CLI using CTRL+ALT+F1. CTRL+ALT+F2 takes me to a black screen, but I don’t know if that’s helpful or not. I have also put a blank “ssh” file (with no extension) in the root of the Micro SD card, but when I attempt to SSH into the Pi using Putty, I get the error that the connection has been refused.

Alternatively, I have also tried the method of installing Raspberry Pi OS Lite, then running the Anthias install script. Using this method, I am able to install RPI OS Lite, and edit the system file that rotates the screen, but when I run the Anthias install script, it fails at the step where it’s trying to “Add Docker apt key”. Following the advice of a forum post, I made sure to update the Pi using something like “sudo apt-get update” then run the Anthias install script again, but it fails at the same step: “Add Docker apt key”.

Any advice on what I might be doing wrong, or what else I should try? Thanks in advance!

6 posts - 2 participants

Read full topic

4 posts - 4 participants

Read full topic

Best regards.

3 posts - 2 participants

Read full topic

I am having a problem with active assets. I have several activated, but only one is working properly. I then connected via SSH to the Raspberry Pi where Anthias is deployed to check the screenly_assets folder, and I can see all my active assets.

Before :

So I deleted all my assets except the one that works. I checked the folders again and I still have several assets.

After :

Is this normal?

9 posts - 2 participants

Read full topic

2 posts - 2 participants

Read full topic

Am I wasting my time trying to get this to work on a 3B+? Is this all lack of resources and should really be using a 4 or 5?

RPI 3B+ 1GB RAM to HDMI to 4k 60hz display. I am trying to display a Google Slides presentation with a presentation link.

Things I’ve found:

• Google Slides transition animations burn down the Anthias instance very quickly and never display without lag. Removing them helped, but only extended the inevitable crash.

• I forced the RPI to 1080p to the display via the cmdline.txt file. This helped the most, still a slow experience with load numbers in the 12-15 range.

• Creating a second asset of the same slideshow, to have the webpage refresh (still Slides presentation) for updated content has crushed performance again and the slideshow never updates.

• I’ve recreated the same 10 slide presentation in a new file and it made no difference.

• The 10 slide presentation is images and text with a few native shapes added, no GIFs, no Videos, all the images are normal sized, etc.

• I’ve tried several SD Cards to rule out IO problems, factory branded Raspbery Pi SD Cards and Sandisk Edge A1 card, neither made a difference.

• I’ve tried multiple PI 3B+s with POE power and Micro USB power to rule out throttling or mischievous hardware. (all of these are brand new)

• HTOP reveals that CPU usage is not high (single digit mostly) except for a blip here and there from the webserver. Memory usage hovers 700-750mb and eventually runs out (788mb avail total)

• Adding a youtube video gets stuck at forever “processing”

• I am on master@54e9121

Any advice greatly appreciated.

Thanks

Thanks

6 posts - 3 participants

Read full topic

I installed Raspberry PI OS (64-bit) using Raspberry Pi imager:

I ran Anthias installation script "bash <(curl -sL https://install-anthias.srly.io)

And I got that error.

Did I do something wrong?

3 posts - 2 participants

Read full topic

I have already attempted two installs, one with Debian 12.12 (minimal install without desktop environment) and another being DietPi (for x86_64 bookworm) and followed this guide. Dietpi, after installation takes about 2gb. This is the disk situation:

root@DietPi:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 915M 0 915M 0% /dev
tmpfs 188M 18M 171M 10% /run
/dev/mmcblk0p2 7.1G 1.6G 5.2G 23% /
tmpfs 940M 4.3M 936M 1% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 1.0G 0 1.0G 0% /tmp
tmpfs 50M 48K 50M 1% /var/log
/dev/mmcblk0p1 63M 12M 52M 19% /boot/efi

Please let me know if there’s a solution.

3 posts - 2 participants

Read full topic

admin@X:~ $ bash <(curl -sL https://install-anthias.srly.io)

admin@X:~ $ cat /etc/os-release

PRETTY_NAME=“Debian GNU/Linux 12 (bookworm)”

NAME=“Debian GNU/Linux”

VERSION_ID=“12”

VERSION=“12 (bookworm)”

VERSION_CODENAME=bookworm

ID=debian

HOME_URL=“https://www.debian.org/”

SUPPORT_URL=" Debian -- User Support "

BUG_REPORT_URL=“https://bugs.debian.org/”

admin@X:~ $ cat /proc/cpuinfo | grep Model

Model : Raspberry Pi 4 Model B Rev 1.5

7 posts - 2 participants

Read full topic

I’m trying to adjust the background of the WebView. At the moment, before a webpage finishes loading, the screen briefly shows a bright white background. Since my website uses a dark theme, the sudden white flash is quite noticeable — and I’d really like to avoid that.

Is there a way to change the default background color of the WebView, or could a setting for a custom defaultBackgroundColor be added in a future update?

Any tips or guidance would be greatly appreciated.
Thanks in advance!

3 posts - 2 participants

Read full topic

The Raspberry Pi has just been formatted and rebuilt from scratch.

This PI 3 Model B+ is external, not inside the TV, with a 64Gb MicroSD memory card.

I attach the photos of the error.

2 posts - 2 participants

Read full topic

j’ai un Raspbery PI-4,avec un OS Lite,( 64 ),lors de l’installation de celui-ci,j’ai un message erreur comme celui-di dessous:

TASK [system : Add Docker apt key (Raspberry Pi)] ******************************
fatal: [localhost]: FAILED! => {“changed”: false, “msg”: “Failed to find required executable “apt-key” in paths: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin”}.

Est ce que vous pouvez m’aider ,je suis novice dans ce langage

Par avance merci

Stephane P

4 posts - 2 participants

Read full topic

2 posts - 2 participants

Read full topic

If I upload an image, Anthias has no problem displaying it, but once I try to show the Slide it just doesn’t do anything. It continues to display the static image asset even if I disable it and enable the slide asset.

6 posts - 2 participants

Read full topic

We’re using Anthias on a Raspberry Pi 4 Model B Rev 1.5, and we’re getting recurring display issues only during video playback. The Anthias splash screen and boot sequence look perfectly fine (crisp and color-accurate), but as soon as the player starts showing MP4 videos, the screen becomes partially green and pixelated, as shown in the attached images.

System Info:

• Device Model: Raspberry Pi 4 Model B Rev 1.5

• Anthias Version: master@5d44ac8

• Free Space: 40G

• Memory: Total: 3614 MB / Used: 769 MB / Free: 122 MB / Available: 2745 MB

• Connection: HDMI (no adapters) + Edision HD Modulator (Hdmi to DVB-T)

• Instaled in the SD card with Balena - not with rasp OS

Issue description:

• The splash screen and interface look perfect on boot.

• The issue starts only when MP4 videos begin playing (no streams, all content stored locally on the Raspberry Pi).

• Video output turns green with digital block artifacts.

Additional observation:
Since the splash screen displays perfectly, it seems the HDMI signal is fine — suggesting the issue lies in GPU video decoding, codec settings, or hardware acceleration.

Thanks in advance for your help!

11 posts - 2 participants

Read full topic

When I run the command: “<(curl -sL https://www.screenly.io/install-ose.sh)” how does the script figure out which image file to download and install on my device?

So far I’ve been using PI3 B+.

In the Releases section on GitHub, for example, version v0.20.3 contains image files for the PI, PI2, PI3, and PI4.

How does it work?

2 posts - 2 participants

Read full topic

This would be very useful when I want to restore a Raspberry Pi with a working Anthias on a specific device.

1 post - 1 participant

Read full topic

3 posts - 2 participants

Read full topic

The Ansible Playbook that Anthias uses for the automated script to install everything

bash <(curl -sL ``https://install-anthias.srly.io``)

has got some things that are no longer available in Debian 13, as they are now deprecated. (things like APT-keys changed to GPG keys for instance)

Solution: Use Bookworm OS for now until there is an updated script for Trixie/Debian 13.

2 posts - 2 participants

Read full topic

1. When prompted via the installer script, can I try to entering e.g. :

v0.20.2
v0.20.0
v0.19.6
v0.19.5
etc… ?

Are these the correct TAGS I need to enter?

2. I know e.g. that some versions only works on Bullseye, so, where can I find a list of Anthias versions compatible with various Raspberry OS versions? Like Bullseye, Bookworm, Trixie, etc. At least from version v0.1 8.7?

Best regards.

4 posts - 2 participants

Read full topic

3 posts - 3 participants

Read full topic

2 posts - 2 participants

Read full topic

I have run several updates and it has continued running fine after a reboot, until today. I ran an update this morning and then after a reboot the screen simply displays a white screen after a reboot. I tried running the update script again, tried a manual ‘sudo apt upgrade’ and have tried multiple reboots but am still getting a white screen.

I can SSH into the pi and everything that I can see looks ok, the web dashboard seems to work fine and I can upload assets etc.

Not sure what to try now to get it working or if i should just re-install… I wish I had made an image of the SD card on a working version but i guess I can flash it and start from scratch!

5 posts - 3 participants

Read full topic

3 posts - 3 participants

Read full topic

35 posts - 6 participants

Read full topic

in this version, help to solve

10 posts - 3 participants

Read full topic