After-hours entry
Construction Yards
Detect perimeter breaches and unexpected equipment movement in open yards using existing cameras.
Breach + movement alerts
Onboarding pilots
Operator-ready perimeter alerts from CCTV
Turn existing CCTV into verified perimeter alerts (clip, zone, timestamp) so security teams and monitoring centers decide fast—no hardware swap.
15 min • Read-only on your CCTV • Clip-based alerts
Perimeter status
What we focus on
Alerts operators can act on
Every alert includes a verified clip, the zone that triggered it, and enough context to decide fast.
Perimeter breach
6s clip
-10s
+10s
Cameras
Cam 03
▾
Zoom
1x
2x
4x
Decision in seconds
Clip, zone, and timestamp so operators decide fast.
Noise controlled
Zones, schedules, and tuning keep noise low.
Escalation-ready
Route alerts with the evidence operators need.
Industries
Built for high-value outdoor sites
Theft and intrusion follow patterns. We turn existing CCTV into operator-ready alerts for the perimeters and zones that matter.
Copper theft
Critical Infrastructure
Remote sites where response time is costly. Detect intrusion and suspicious presence near sensitive zones (cable runs, substations, shelters).
Remote perimeter alerts
Gates & docks
Warehouses & Storage
Verify alarms around gates, loading docks, and exterior storage with clip-based alerts. Less time reviewing low-signal footage.
Gate + dock verification alerts
Pilot
What a pilot includes
1
We connect to a handful of your cameras
— read-only, no new hardware.
2
You define the zones and escalation rules that matter to your
site.
3
Operators receive alerts with clips; we iterate based on real
feedback.
FAQ
Frequently asked questions
Do you work with our existing cameras / VMS?
Yes, pilots are built around your current CCTV. We connect read-only to a small set of cameras covering perimeter lines and entry points (often via RTSP or your VMS). No rip-and-replace required.
What's required to start a pilot?
Typically: 3-8 cameras, a site contact, and access to live feeds or 1-2 weeks of recent footage. You define zones (e.g. fence line) and escalation rules (after-hours, who gets notified). We handle setup and iteration.
Where is video processed and stored?
We process only what's needed to generate alerts and evidence clips. You control retention and access. Pilots can be run with minimal storage (short clips per alert) and read-only access to your camera system. (We'll align on your security requirements before connecting.)
How do you keep alert noise under control outdoors?
We don't ship raw detections. Alerts are tied to zones + schedules and are tuned during the pilot based on operator feedback. The output is “operator-ready” (short clip, triggering zone, and context) so teams can decide quickly without reviewing streams.
What does the operator workflow look like?
Operators receive a verified alert (clip + zone + timestamp) and choose: mute/dismiss or escalate. If there's doubt, they can replay around the event and switch camera context. The goal is fast decisions without opening a heavy dashboard.
How is pricing structured after the pilot?
We typically price per site (or per camera bundle) based on the number of monitored zones and alert volume. The pilot is a short, fixed scope; after the pilot we propose a production plan based on what worked and what coverage you want.
Give operators alerts they can trust
Less time reviewing footage, more time responding—with evidence attached to every alert.
Get a pilot scopeNo hardware swap • Read-only connection