Jekyll2025-06-02T05:32:12-07:00https://yzhangec.github.io/feed.xmlHomepagepersonal descriptionZhang Yichen (張亦宸)Nanolink RTL8125B: A Super Tiny USB 2.0 to Ethernet Adaptor2024-04-12T00:00:00-07:002024-04-12T00:00:00-07:00https://yzhangec.github.io/posts/2024/04/NanoLink-RTL8125BFor more details, please check: Nanolink RTL8251B

]]>Zhang Yichen (張亦宸)User Instruction for 3D Printer 4Max Pro2020-12-24T00:00:00-08:002020-12-24T00:00:00-08:00https://yzhangec.github.io/posts/2020/12/4MaxProThis is a general user instruction for AnyCubic printer 4Max Pro placed in the flying testing field. For any enquiries, please contact Eason.

4MaxPro

Official User Manual: 中/En

Cura Download: Ultimaker Cura

Standard Precausion

  1. PLA/PLA+/TPU ONLY. The printer is not suitable for printing ABS material.
  2. DO NOT take out the finished work until the temperature of heating plate is lower than 45°C.
  3. Heat the nozzle to at least 200°C to replace material.

Important Setup

]]>Zhang Yichen (張亦宸)User Instruction for 3D Printer Cetus MK32020-12-24T00:00:00-08:002020-12-24T00:00:00-08:00https://yzhangec.github.io/posts/2020/12/CetusMK3This is a general user instruction for Tiertime printer Cetus MK3 Extended placed in the flying testing field. For any enquiries, please contact Eason.

CetusMK3

Official User Manual: 中/En

UP Studio Download (Windows Only): UP Studio

Standard Precausion

  1. Initialize printer before every print job.
  2. Use auto meterial replacement, pull out filament gently.

Important Setup

  1. Nozzle height: 282.90mm
]]>Zhang Yichen (張亦宸)