Maker Faire will come to Rome in the weekend of 14-15-16 October 2016, and I plan to go there. The faire format is by Make Magazine, and gathers the makers from all around the globe, so that they have the possibility to interact and showcase their work and their art. The maker movement has gained traction […]
The ST Nucleo is an Arduino-like board with an STM32 as the microcontroller, and many Arduino shields can be mounted on it. I recently played with an Ethernet shield for the network connection, but since the shield also contains a microSD card slot, I wanted to access the SD card to read/write files. I’d like to […]
While adding HTTPS capabilities to my STM32 Nucleo board, I needed to solve the problem of current time. This is because TLS needs to check certificate expiration date, so we need a sufficiently accurate estimation of time. So I tried to understand what could I do to ask a network server about the time. I […]
One of my goal of the past months was to use an STM32 Nucleo board to get a webpage through HTTPS, using an Ethernet shield for TCP/IP stack. I was close last time, but I discovered that my Nucleo-F103RB did not have enough RAM. Now I have my hands on a Nucleo-F411RE that has 128KiB of RAM […]
It’s been months since I started playing with a STM32 Nucleo + Ethernet shield. One of the objectives that I chase is to build a device for the Internet of Things that implement reasonably secure communications. In an effort to avoid reinventing the wheel (or at least to not reinvent too many wheels) I wanted to see if […]
I am still working on a device consisting of STM32 Nucleo F103RB with a W5100 Ethernet shield. This time I included a DNS client, so that the device can connect to a server by knowing its name. The name resolving can be invoked by using the POSIX functions getaddrinfo and gethostbyname. DNS queries can have different […]
I am still working on a device consisting of STM32 Nucleo F103RB with a W5100 Ethernet shield. This time I included a DHCP client, so that when the device is attached to a network, it will ask for an IP address instead of being statically allocated. The DHCP protocol follows the RFC 2131 and RFC 2132, and […]
I am writing a library that implements POSIX sockets, also called Berkeley sockets, for my ST Nucleo+Ethernet shield setup. The functionality that is currently in place, as for the source code on GitHub, allows for TCP client/server connections and UDP client/server communication using Wiznet W5100 chip resources. The interface is not complete, but what’s in place is taken as literally as I […]
In a previous post I connected a Nucleo board with an Ethernet shield, with the SPI wired between the STM32 and the Wiznet W5100 chip. I am now in the process of writing some C tests for it on a GitHub repository, and in particular a socket library that tries to conform to POSIX specifications. At this […]
I have a clone of the Arduino Ethernet shield R2, and I already hooked it up on an Arduino Uno, as explained in a previous post. But I also have an STM32 Nucleo-F103RB board, which is similar to Arduino with respect to many of its pins, so I wanted to try this shield with it. The main […]
Posts
Freedom Embedded 
September 28, 2016
0