ESP32-S3 based ExpressLRS Handset. Tested with G-NiceRF LORA1280F27-TCXO.

Do not use ESP32-S3 with Octal SPI PSRAM, due to it occupies GPIO35~37.

Use target Unified_ESP32S3_2400_TX_via_UART.

Choose one of the 2) RunCam ESP32-S3 E28 TX, or 3) RunCam ESP32-S3 F27 TX configuration to load into the firmware file.

For auto choose in file UnifiedConfiguration.py set proper number to

101: choice = 3 #input() or leave as is 101: choice = input()