An implementation of the Raft distributed consensus protocol, verified in Coq using the Verdi framework.

Definitions and proofs:

• Coq 8.6
• Verdi
• StructTact
• Cheerios
• Verdi Cheerios

Executable vard key-value store:

• OCaml 4.02.3 (or later)
• OCamlbuild
• verdi-runtime

Executable vard-serialized key-value store with verified message serialization:

• cheerios-runtime

Client for vard:

• Python 2.7

Integration testing of vard:

• Python 2.7

Unit testing of unverified vard code:

• OUnit 2.0.0

We recommend installing the dependencies of Verdi Raft via OPAM:

opam repo add coq-released https://coq.inria.fr/opam/released
opam repo add distributedcomponents-dev http://opam-dev.distributedcomponents.net
opam install verdi StructTact verdi-runtime ocamlbuild cheerios verdi-cheerios cheerios-runtime

Then, run ./configure in the Verdi Raft root directory. This will check for the appropriate version of Coq and ensure all necessary Coq dependencies can be located. By default, Verdi, StructTact, Cheerios, and VerdiCheerios are assumed to be installed in Coq's user-contrib directory, but this can be overridden by setting the Verdi_PATH, StructTact_PATH, Cheerios_PATH, and VerdiCheerios_PATH environment variables.

Finally, run make in the root directory. This will compile the Raft implementation and proof interfaces, and check all the proofs.

To build the vard key-value store program in extraction/vard, run make vard in the root directory. If the implementation has been compiled as above, this simply extracts code to OCaml and compiles the result to a native program; otherwise, the implementation Coq code is compiled without checking any proofs.

The raft and raft-proofs subdirectories contain the implementation and verification of Raft. For each proof interface file in raft, there is a corresponding proof file in raft-proofs. The files in the raft subdirectory include:

• Raft.v: an implementation of Raft in Verdi
• RaftRefinementInterface.v: an application of the ghost-variable transformer to Raft which tracks several ghost variables used in the verification of Raft
• CommonTheorems.v: several useful theorems about functions used by the Raft implementation
• OneLeaderPerTermInterface: a statement of Raft's election safety property. See also the corresponding proof file in raft-proofs.
  • CandidatesVoteForSelvesInterface.v, VotesCorrectInterface.v, and CroniesCorrectInterface.v: statements of properties used by the proof OneLeaderPerTermProof.v
• LogMatchingInterface.v: a statement of Raft's log matching property. See also LogMatchingProof.v in raft-proofs
  • LeaderSublogInterface.v, SortedInterface.v, and UniqueIndicesInterface.v: statements of properties used by LogMatchingProof.v

The file EndToEndLinearizability.v in raft-proofs uses the proofs of all proof interfaces to show Raft's linearizability property.

vard is a simple key-value store implemented using Verdi. vard is specified and verified against Verdi's state-machine semantics in the VarD.v example system distributed with Verdi. When the Raft transformer is applied, vard can be run as a strongly-consistent, fault-tolerant key-value store along the lines of etcd.

After running make vard in the root directory, OCaml code for vard is extracted, compiled, and linked against a Verdi shim and some vard-specific serialization/debugging code, to produce a vard.native binary in extraction/vard.

Running make bench-vard in extraction/vard will produce some benchmark numbers, which are largely meaningless on localhost (multiple processes writing and fsync-ing to the same disk and communicating over loopback doesn't accurately model real-world use cases). Running make debug will get you a tmux session where you can play around with a vard cluster in debug mode; look in bench/vard.py for a simple Python vard client.

As the name suggests, vard is designed to be comparable to the etcd key-value store (although it currently supports many fewer features). To that end, we include a very simple etcd "client" which can be used for benchmarking. Running make bench-etcd will run the vard benchmarks against etcd (although see above for why these results are not particularly meaningful). See below for instructions to run both stores on a cluster in order to get a more useful performance comparison.

vard accepts the following command-line options:

-me NAME             name for this node
-port PORT           port for client commands
-dbpath DIRECTORY    directory for storing database files
-node NAME,IP:PORT   node in the cluster
-debug               run in debug mode

Note that vard node names are integers starting from 0.

For example, to run vard on a cluster with IP addresses 192.168.0.1, 192.168.0.2, 192.168.0.3, client (input) port 8000, and port 9000 for inter-node communication, use the following:

# on 192.168.0.1
$ ./vard.native -dbpath /tmp/vard-8000 -port 8000 -me 0 -node 0,192.168.0.1:9000 \
                -node 1,192.168.0.2:9000 -node 2,192.168.0.3:9000

# on 192.168.0.2
$ ./vard.native -dbpath /tmp/vard-8000 -port 8000 -me 1 -node 0,192.168.0.1:9000 \
                -node 1,192.168.0.2:9000 -node 2,192.168.0.3:9000

# on 192.168.0.3
$ ./vard.native -dbpath /tmp/vard-8000 -port 8000 -me 2 -node 0,192.168.0.1:9000 \
                    -node 1,192.168.0.2:9000 -node 2,192.168.0.3:9000

When the cluster is set up, a benchmark can be run as follows:

# on the client machine
$ python2 bench/setup.py --service vard --keys 50 \
                         --cluster "192.168.0.1:8000,192.168.0.2:8000,192.168.0.3:8000"
$ python2 bench/bench.py --service vard --keys 50 \
                         --cluster "192.168.0.1:8000,192.168.0.2:8000,192.168.0.3:8000" \
                         --threads 8 --requests 100

We can compare numbers for vard and etcd running on the same cluster as follows:

# on 192.168.0.1
$ etcd --name=one \
 --listen-client-urls http://192.168.0.1:8000 \
 --advertise-client-urls http://192.168.0.1:8000 \
 --initial-advertise-peer-urls http://192.168.0.1:9000 \
 --listen-peer-urls http://192.168.0.1:9000 \
 --data-dir=/tmp/etcd \
 --initial-cluster "one=http://192.168.0.1:9000,two=http://192.168.0.2:9000,three=http://192.168.0.3:9000"

# on 192.168.0.2
$ etcd --name=two \
 --listen-client-urls http://192.168.0.2:8000 \
 --advertise-client-urls http://192.168.0.2:8000 \
 --initial-advertise-peer-urls http://192.168.0.2:9000 \
 --listen-peer-urls http://192.168.0.2:9000 \
 --data-dir=/tmp/etcd \
 --initial-cluster "one=http://192.168.0.1:9000,two=http://192.168.0.2:9000,three=http://192.168.0.3:9000"

# on 192.168.0.3
$ etcd --name=three \
 --listen-client-urls http://192.168.0.3:8000 \
 --advertise-client-urls http://192.168.0.3:8000 \
 --initial-advertise-peer-urls http://192.168.0.3:9000 \
 --listen-peer-urls http://192.168.0.3:9000 \
 --data-dir=/tmp/etcd \
 --initial-cluster "one=http://192.168.0.1:9000,two=http://192.168.0.2:9000,three=http://192.168.0.3:9000"

# on the client machine
$ python2 bench/setup.py --service etcd --keys 50 \
                         --cluster "192.168.0.1:8000,192.168.0.2:8000,192.168.0.3:8000"
$ python2 bench/bench.py --service etcd --keys 50 \
                         --cluster "192.168.0.1:8000,192.168.0.2:8000,192.168.0.3:8000" \
                         --threads 8 --requests 100