I have the next model up (400 Pro) so mine will likely accept larger diameter branches. But with that said one needs to learn the machine’s limits in terms of both diameter and wetness.
Before I chip up a pile of branches I’ll go through with a swede saw and lop off any parts that are too big. That’ll let me breeze through the pile without fighting the machine too much. Also cut apart any wide crotches that won’t feed through on their own.
Great point. The drawer width was taken on a story stick, not numerically. I first made I side spacer blocks and then made a sandwich on the old shelf with a spacer block and a 1" block (each slide takes up 1/2") and then marked off the gap on a stick.
Observant folks might notice that I made the drawers sideways. Normally the rabbeted piece is on the side to use the mechanical advantage of the joint. But then measuring the length of the front/back pieces also involves the joint. I wanted make this task as easy as possible so I used the full length, rabbeted pieces on the front & back.
I have a big bag of knock offs from Amazon and can confirm that they work well!
Is the hot water for cleaning efficiency or just comfort?
Ah I see it now! Thanks for the info.
Which part is the flame sensor? Our furnace is getting old, last year I had to replace the exhaust fan pressure sensor. What were the symptoms?
+1 to Freetax USA! It handles all the stuff which require premium editions of other tax applications. And this year they’ve added PDF parsing which greatly simplified my 1099s.
The $16 is if you’re also filing state taxes with it. Federal is still free.
I wonder how many people actually only do federal with it? 2%?
Looks great! How did you join the panels at the corners?
You should be wary of giving universal “bad idea” advice for under bench storage. I have a split top Rubou with a cabinet underneath that’s worked great for over ten years now. There’s enough room between the top of the cabinet and bottom of the bench top to let in a clamp head.
The diagonal brace is likely overkill and will get in the way of accessing the underside or a shelf should you choose to put one in. The whole bench will likely slide along the floor before it racks should you push hard enough.
Just writing so that other bench builders make that consideration not to shit on your project.
I have some handy aliases so I use CLI most of the time. And on my gaming keyboard I have the side macro keys set to:
For merge conflicts I’ll use whatever the IDE provides.
Another question for ya - I can get a 30" version at Menard’s for the same price as the 22". If I was doing a small grill session (say 6 burgers) would the extra interior space detract from the grilling?
Thank you so much for details!! Your process makes perfect sense. I’m definitely to save some money and get a simpler model.
Does your grill have a fire access door?
I’ve had my Baratza Virtuoso since 2014-ish and was able to replace the burrs last year. Recommended.
Maybe that’s the right wing halftime show?
Thanks for the detail - our single basin sink came with one of these and we never used it.
What character is holding him hostage?
How did you use the old cookie container?