Repository files navigation Use Cases: Capabilities provided by the current Nucleus units.
Connected ATAK EUD's will automatically discover other EUD's connected to IP mesh network or Meshtastic network (if plugin enabled)
Enough throughput for instant position and text updates along with pictures,video, routes, etc
OpenTAKserver can be installed to run locally on the Nucleus
Included Mediamtx install allows video to be streamed to OpenTAKserver and distributed out to other devices on the IP mesh network.
Any program using an IP network connection
Reticulum
Onboard stand alone Meshtastic node. Interface via official application over BT or via serial with control/interaction via Nucleus web UI
Onboard transport instance. Connected/configured Reticulum devices can communicate over the mesh network
Direct and group calls, PTT or full time voice functionality
Voice messages via Sideband
Onboard Tailscale instance pre-configured to the natakmesh Tailnet but available to user to add their own
Any mesh node can be connected to an Internet source and pass that connection out across the mesh
2.4 GHz 802.11s mesh network on wlan1.
WPA3 encryption
Unicast routing via babeld, multicast routing via smcroute
Onboard RAK4631 LoRa radio running Meshtastic firmware
Interface via the Meshtastic official application
Powered by USB connection to radio SBC
USB connection provides data path, can be configured to run Rnode firmware or interact with Meshtastic CLI on radio
Can either provide internet access to the node to be passed to mesh, or can provide local hard line access for devices to connect to mesh
Pi onboard Wi-Fi (wlan0) in AP mode
5.8GHz AP to connect external devices to the mesh node
About
Working repo for the Nucleus family of mesh radios
Resources
Stars
Watchers
Forks
You can’t perform that action at this time.