Simple breakout board for an RJ45 with LEDs. Has two 0805 resistor pads tied to Vin with pins for LED1/2-. Has solder pads for both shield legs to optionally tie to ground. Intended for use with Amphenol RJHSE-548x series. You can find this project on GitHub. Fits breadboard well with headers 0.9" apart.

The board measured 0.65x1.20in (17x30mm) and was designed for production at OSH Park. The OSHPark DRU is located in the res/ folder.

The boards can be purchased here @ $3.90 for three.

All parts on this board are from the LoganSmith-Eagle-Library available on GitHub (work in progress).

The BOM is located in the release folder, all parts are sourced from Digi-Key.

This project adheres to this structure:

[ProjectName]
	README.md
	[release]
		[Major.Minor]
			ProjectName_BOM_Major.Minor.xls or ProjectName_BOM_BOM_Major.Minor.csv
			ProjectName_schematic_Major.Minor.pdf
			ProjectName_board-<top/mid#/bottom>_Major.Minor.png
			ProjectName_Major.Minor.sch
			ProjectName_Major.Minor.brd
			[Gerbers]
				...
		...
	[src]
		[Major.0]
			BoardName.sch
			BoardName.brd
			BOM.xls or BOM.csv
		[Major+1.0]
			...
		...
	[lib]
		...
	[res]
		Manufacturer.dru
		Manufacturer.cam