Arduino library for the 7Semi BME690 environmental sensor module. Reads temperature, humidity, barometric pressure, and gas resistance (VOC) data via I2C. Ideal for air quality and weather monitoring applications.

Official Arduino library for interfacing with the 7Semi L89HA GNSS Module over UART. This library enables easy communication and data parsing of NMEA sentences, allowing you to retrieve GPS location, time, and satellite data with minimal effort.

This Arduino library provides support for the 7Semi-HMC6343 3-axis digital compass sensor over I2C. It allows reading of tilt-compensated heading, pitch, and roll, and includes features like magnetic variation correction and low-power control.

Arduino wrapper library for the Bosch Sensortec BMV080 particulate matter sensor (PM1 / PM2.5 / PM10).

Arduino library for 7Semi ADS1262 (10-channel) and ADS1263 (32-channel) 32-bit ADC boards. Supports SPI communication and high-precision differential or single-ended voltage measurements.

This Arduino library provides an interface for reading 3-axis analog acceleration data from the 7Semi ADXL335 Accelerometer Module. It allows easy integration and measurement of X, Y, and Z axis acceleration using Arduino analog inputs.

Arduino library for the MMC5983MA high-precision 3-axis magnetometer with I2C support.

Lightweight driver for Sensirion SHT2x temperature and humidity sensors with I²C support, CRC validation, and configurable resolution.

Arduino library for Sensirion SCD40/SCD41 CO₂, temperature, and humidity sensors – by 7Semi.

Arduino library for 7Semi SCD4x (SCD40/SCD41) CO₂, temperature, and humidity sensors using I2C

Arduino driver for the TMP102 high-accuracy digital temperature sensor with I²C interface, supporting alerts, conversion control, and power modes.

7Semi DAC7578 Arduino library for controlling an 8-channel 12-bit I2C DAC.

This repository provides an Arduino-compatible library for using the 7Semi BNO08x IMU sensor over I2C, SPI, or UART. It includes easy-to-use APIs, configuration support, and example sketches for quick integration with microcontrollers.

Arduino library for STMicroelectronics LIS3DH 3-axis accelerometer with I2C/SPI support, raw & g-unit outputs, interrupts, ADC channels, and temperature sensing.

Arduino I2C driver for TI OPT4048 color sensor with RGB and lux helpers.

I2C-based DS2482 driver for 1-Wire devices with ROM search and sensor support.

Arduino library for the Bosch Sensortec BMP58x barometric pressure sensor. Supports I2C and SPI.

Arduino library for the 7Semi MAX17048 Fuel Gauge Sensor Module. Measures battery voltage and state of charge via I2C.

This Arduino library provides support for the 7Semi INA260 Module, a high-precision digital sensor for current, voltage, and power monitoring via I2C. It enables easy access to real-time power metrics, useful in energy monitoring, battery profiling, and embedded power control systems.

A lightweight, type-safe Arduino library for the Texas Instruments INA219 precision bidirectional current, voltage, and power sensor — supporting AVR, ESP32, and ESP8266 platforms with easy calibration and multi-sensor support.