Open Sourced Multimodal Learning Analytics system to provide automated feedback for oral presentations.
Please check the hardware section.
Follow the instructions here
git clone https://github.com/xaoch/OpenOPAF.git
sudo apt-get update
sudo apt-get install -y python3-pip
pip3 install --upgrade pip
cd OpenOPAF
sudo apt-get install libxml2-dev libxslt-dev python-dev
sudo apt-get install libjpeg-dev zlib1g-dev
sudo apt-get install libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0
sudo apt-get install libffi-dev
pip3 install -r requirements.txt
Follow the instructions here. The process will take at least 2 hours.
cd
cd OpenOPAF
sudo apt-get install python3-venv
python3 -m venv --system-site-packages ooEnv
python3 create_database.py
export FLASK_APP=application
flask run --host=0.0.0.0
Get the IP from your device (or configure an alias in the router):
ifconfig
In the browser of the machine that will project the interface and the virtual audience access, set the web browser to http://ipNumber:5000
If you are able to see the interface, the system is ready. Kill the server to continue the installation.
Install nano file editor and edit start.sh file
sudo apt-get install nano
nano start.sh
Change the following line in the start.sh file to reflect the location of the OpenOPAF directory.
cd /home/augmented/OpenOPAF
Now create the systemd service file:
sudo nano /lib/systemd/system/openopaf.service
The contents of the files should be:
[Unit]
Description=OpenOPAF Service
After=network.target
[Service]
Type=idle
Restart=on-failure
User=<the user that you created at OS Installation>
ExecStart=/path-to-OpenOPAF/start.sh
[Install]
WantedBy=multi-user.target
Now restart the demon to start and enable the service
sudo systemctl daemon-reload
sudo systemctl enable openopaf.service
sudo systemctl start openopaf.service
Check if the service is active with:
sudo systemctl status openopaf.service
Now every time that the Jetson Nano starts, it will start the OpenOPAF application after a few minutes.
You can install the Jetson Nano inside the case and use it without a monitor.
If you have any questions or problems running the project, contact [email protected].