{toolchain}[system/system] lompi v2025b, lmpich v2025b, llvm-compilers v20.1.8 by Thyre · Pull Request #24481 · easybuilders/easybuild-easyconfigs

Thyre · 2025-11-07T07:41:31Z

(created using eb --new-pr)

This is part of a series of PRs adding an LLVM toolchain for 2025b.
Right now, the modules use llvm-compilers, whereas the framework PR is using LLVMtc. I'll adapt based on the result of the discussion in Slack.

Requires:

Implementing a new LLVM based toolchain easybuild-framework#4914
enhance custom easyblock for ELPA, OpenMPI, QuantumESPRESSO to work with LLVM-based toolchain easybuild-easyblocks#3759 (for OpenMPI sanity check)

Test reports:

Success Raptor Lake
Success Alder Lake
Success Neoverse V1
Success Neoverse V2
Success Zen 3
Success Zen 4
Success Zen 5

…0.1.8.eb

github-actions · 2025-11-07T07:42:04Z

Updated software `MPICH-4.3.2-llvm-compilers-20.1.8.eb`

Diff against MPICH-4.3.2-GCC-14.3.0.eb

easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-GCC-14.3.0.eb

diff --git a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-GCC-14.3.0.eb b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
index d7389b334e..8322f9ec37 100644
--- a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-GCC-14.3.0.eb
+++ b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
@@ -5,10 +5,7 @@ homepage = 'https://www.mpich.org/'
 description = """MPICH is a high-performance and widely portable implementation
 of the Message Passing Interface (MPI) standard (MPI-1, MPI-2 and MPI-3)."""
 
-toolchain = {'name': 'GCC', 'version': '14.3.0'}
-toolchainopts = {
-    'extra_fflags': '-w -fallow-argument-mismatch -O2'
-}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.mpich.org/static/downloads/%(version)s']
 sources = [SOURCELOWER_TAR_GZ]

Diff against MPICH-4.3.0-GCC-14.2.0-CUDA-12.8.0.eb

easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0-CUDA-12.8.0.eb

diff --git a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0-CUDA-12.8.0.eb b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
index 2d02693cce..8322f9ec37 100644
--- a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0-CUDA-12.8.0.eb
+++ b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
@@ -1,25 +1,19 @@
 name = 'MPICH'
-version = '4.3.0'
-versionsuffix = '-CUDA-%(cudaver)s'
+version = '4.3.2'
 
 homepage = 'https://www.mpich.org/'
 description = """MPICH is a high-performance and widely portable implementation
 of the Message Passing Interface (MPI) standard (MPI-1, MPI-2 and MPI-3)."""
 
-toolchain = {'name': 'GCC', 'version': '14.2.0'}
-toolchainopts = {
-    'extra_fflags': '-w -fallow-argument-mismatch -O2'
-}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.mpich.org/static/downloads/%(version)s']
 sources = [SOURCELOWER_TAR_GZ]
-checksums = ['5e04132984ad83cab9cc53f76072d2b5ef5a6d24b0a9ff9047a8ff96121bcc63']
+checksums = ['47d774587a7156a53752218c811c852e70ac44db9c502dc3f399b4cb817e3818']
 
 dependencies = [
-    ('hwloc', '2.11.2'),
-    ('UCX', '1.18.0'),
-    ('UCX-CUDA', '1.18.0', versionsuffix),
-    ('CUDA', '12.8.0', '', SYSTEM),
+    ('hwloc', '2.12.1'),
+    ('UCX', '1.19.0'),
 ]
 
 # Also build (separate) MPI ABI

Diff against MPICH-4.3.0-GCC-14.2.0.eb

easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0.eb

diff --git a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0.eb b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
index e7b46908d3..8322f9ec37 100644
--- a/easybuild/easyconfigs/m/MPICH/MPICH-4.3.0-GCC-14.2.0.eb
+++ b/easybuild/easyconfigs/m/MPICH/MPICH-4.3.2-llvm-compilers-20.1.8.eb
@@ -1,22 +1,19 @@
 name = 'MPICH'
-version = '4.3.0'
+version = '4.3.2'
 
 homepage = 'https://www.mpich.org/'
 description = """MPICH is a high-performance and widely portable implementation
 of the Message Passing Interface (MPI) standard (MPI-1, MPI-2 and MPI-3)."""
 
-toolchain = {'name': 'GCC', 'version': '14.2.0'}
-toolchainopts = {
-    'extra_fflags': '-w -fallow-argument-mismatch -O2'
-}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.mpich.org/static/downloads/%(version)s']
 sources = [SOURCELOWER_TAR_GZ]
-checksums = ['5e04132984ad83cab9cc53f76072d2b5ef5a6d24b0a9ff9047a8ff96121bcc63']
+checksums = ['47d774587a7156a53752218c811c852e70ac44db9c502dc3f399b4cb817e3818']
 
 dependencies = [
-    ('hwloc', '2.11.2'),
-    ('UCX', '1.18.0'),
+    ('hwloc', '2.12.1'),
+    ('UCX', '1.19.0'),
 ]
 
 # Also build (separate) MPI ABI

Updated software `OpenMPI-5.0.8-llvm-compilers-20.1.8.eb`

Diff against OpenMPI-5.0.8-GCC-14.3.0.eb

easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-GCC-14.3.0.eb

diff --git a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-GCC-14.3.0.eb b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
index c98bd6e17d..c7d514c9cf 100644
--- a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-GCC-14.3.0.eb
+++ b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
@@ -4,23 +4,27 @@ version = '5.0.8'
 homepage = 'https://www.open-mpi.org/'
 description = """The Open MPI Project is an open source MPI-3 implementation."""
 
-toolchain = {'name': 'GCC', 'version': '14.3.0'}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.open-mpi.org/software/ompi/v%(version_major_minor)s/downloads']
 sources = [SOURCELOWER_TAR_BZ2]
 patches = [
     ('OpenMPI-5.0.7_build-with-internal-cuda-header.patch', 1),
     'OpenMPI-5.0.7_fix_gpfs_compatibility.patch',
+    'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch',
 ]
 checksums = [
     {'openmpi-5.0.8.tar.bz2': '53131e1a57e7270f645707f8b0b65ba56048f5b5ac3f68faabed3eb0d710e449'},
     {'OpenMPI-5.0.7_build-with-internal-cuda-header.patch':
      '14ffaf02a9c675ac66a2a9af727295179d4ce097174c88db59669d460d8c4da1'},
     {'OpenMPI-5.0.7_fix_gpfs_compatibility.patch': '9739134ce273a691c9deac6e410510653a88c1542b60dbf8789e4a423447d4f6'},
+    {'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch':
+     '75d4417e35252ea3a19b2792f1b06e9aeb408c253aa4921d77226d57b71dee45'},
 ]
 
 builddependencies = [
     ('pkgconf', '2.4.3'),
+    ('Perl', '5.40.2'),
     ('Autotools', '20250527'),
 ]
 
@@ -36,7 +40,9 @@ dependencies = [
 ]
 
 # CUDA related patches and custom configure option can be removed if CUDA support isn't wanted.
-preconfigopts = 'gcc -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
+preconfigopts = 'clang -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
+# Update configure to include changes from the "disable_opal_path_nfs_test" patch
+preconfigopts += './autogen.pl --force && '
 # Disable building Level Zero components of romio if system dependencies are picked up. Sources are not based on
 # recent Level Zero interface anyway, so there's a high chance that builds fail.
 # See https://github.com/open-mpi/ompi/issues/10235

Diff against OpenMPI-5.0.7-intel-compilers-2025.1.1.eb

easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.7-intel-compilers-2025.1.1.eb

diff --git a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.7-intel-compilers-2025.1.1.eb b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
index ebe8416333..c7d514c9cf 100644
--- a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.7-intel-compilers-2025.1.1.eb
+++ b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
@@ -1,50 +1,53 @@
 name = 'OpenMPI'
-version = '5.0.7'
+version = '5.0.8'
 
 homepage = 'https://www.open-mpi.org/'
 description = """The Open MPI Project is an open source MPI-3 implementation."""
 
-toolchain = {'name': 'intel-compilers', 'version': '2025.1.1'}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.open-mpi.org/software/ompi/v%(version_major_minor)s/downloads']
 sources = [SOURCELOWER_TAR_BZ2]
 patches = [
     ('OpenMPI-5.0.7_build-with-internal-cuda-header.patch', 1),
-    ('OpenMPI-5.0.7_fix-sshmem-build-failure.patch'),
     'OpenMPI-5.0.7_fix_gpfs_compatibility.patch',
+    'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch',
 ]
 checksums = [
-    {'openmpi-5.0.7.tar.bz2': '119f2009936a403334d0df3c0d74d5595a32d99497f9b1d41e90019fee2fc2dd'},
+    {'openmpi-5.0.8.tar.bz2': '53131e1a57e7270f645707f8b0b65ba56048f5b5ac3f68faabed3eb0d710e449'},
     {'OpenMPI-5.0.7_build-with-internal-cuda-header.patch':
      '14ffaf02a9c675ac66a2a9af727295179d4ce097174c88db59669d460d8c4da1'},
-    {'OpenMPI-5.0.7_fix-sshmem-build-failure.patch':
-     '7382a5bbe44c6eff9ab05c8f315a8911d529749655126d4375e44e809bfedec7'},
     {'OpenMPI-5.0.7_fix_gpfs_compatibility.patch': '9739134ce273a691c9deac6e410510653a88c1542b60dbf8789e4a423447d4f6'},
+    {'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch':
+     '75d4417e35252ea3a19b2792f1b06e9aeb408c253aa4921d77226d57b71dee45'},
 ]
 
 builddependencies = [
-    ('pkgconf', '2.3.0'),
-    ('Autotools', '20240712'),
+    ('pkgconf', '2.4.3'),
+    ('Perl', '5.40.2'),
+    ('Autotools', '20250527'),
 ]
 
 dependencies = [
     ('zlib', '1.3.1'),
-    ('hwloc', '2.11.2'),
+    ('hwloc', '2.12.1'),
     ('libevent', '2.1.12'),
-    ('UCX', '1.18.0'),
-    ('libfabric', '2.0.0'),
-    ('PMIx', '5.0.6'),
-    ('PRRTE', '3.0.8'),
-    ('UCC', '1.3.0'),
+    ('UCX', '1.19.0'),
+    ('libfabric', '2.1.0'),
+    ('PMIx', '5.0.8'),
+    ('PRRTE', '3.0.11'),
+    ('UCC', '1.4.4'),
 ]
 
 # CUDA related patches and custom configure option can be removed if CUDA support isn't wanted.
-preconfigopts = 'gcc -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
-configopts = '--with-cuda=%(start_dir)s/opal/mca/cuda --with-show-load-errors=no'
+preconfigopts = 'clang -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
+# Update configure to include changes from the "disable_opal_path_nfs_test" patch
+preconfigopts += './autogen.pl --force && '
 # Disable building Level Zero components of romio if system dependencies are picked up. Sources are not based on
 # recent Level Zero interface anyway, so there's a high chance that builds fail.
 # See https://github.com/open-mpi/ompi/issues/10235
 preconfigopts += 'sed -i "s/have_ze=yes/have_ze=no/" %(start_dir)s/3rd-party/romio341/mpl/configure && '
+configopts = '--with-cuda=%(start_dir)s/opal/mca/cuda --with-show-load-errors=no'
 # Do not pick up the system library automatically
 configopts += ' --without-xpmem'

Diff against OpenMPI-5.0.3-intel-compilers-2024.2.0.eb

easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.3-intel-compilers-2024.2.0.eb

diff --git a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.3-intel-compilers-2024.2.0.eb b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
index 54e9ca2f16..c7d514c9cf 100644
--- a/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.3-intel-compilers-2024.2.0.eb
+++ b/easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb
@@ -1,49 +1,53 @@
 name = 'OpenMPI'
-version = '5.0.3'
+version = '5.0.8'
 
 homepage = 'https://www.open-mpi.org/'
 description = """The Open MPI Project is an open source MPI-3 implementation."""
 
-toolchain = {'name': 'intel-compilers', 'version': '2024.2.0'}
+toolchain = {'name': 'llvm-compilers', 'version': '20.1.8'}
 
 source_urls = ['https://www.open-mpi.org/software/ompi/v%(version_major_minor)s/downloads']
 sources = [SOURCELOWER_TAR_BZ2]
 patches = [
-    ('OpenMPI-5.0.2_build-with-internal-cuda-header.patch', 1),
-    'OpenMPI-5.0.3_fix_c90_compliance.patch',
+    ('OpenMPI-5.0.7_build-with-internal-cuda-header.patch', 1),
     'OpenMPI-5.0.7_fix_gpfs_compatibility.patch',
+    'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch',
 ]
 checksums = [
-    {'openmpi-5.0.3.tar.bz2': '990582f206b3ab32e938aa31bbf07c639368e4405dca196fabe7f0f76eeda90b'},
-    {'OpenMPI-5.0.2_build-with-internal-cuda-header.patch':
-     'f52dc470543f35efef10d651dd159c771ae25f8f76a420d20d87abf4dc769ed7'},
-    {'OpenMPI-5.0.3_fix_c90_compliance.patch': 'ece1dff504673179daf298f74c978d31132fcde71af9eca38a530b30aec85cca'},
+    {'openmpi-5.0.8.tar.bz2': '53131e1a57e7270f645707f8b0b65ba56048f5b5ac3f68faabed3eb0d710e449'},
+    {'OpenMPI-5.0.7_build-with-internal-cuda-header.patch':
+     '14ffaf02a9c675ac66a2a9af727295179d4ce097174c88db59669d460d8c4da1'},
     {'OpenMPI-5.0.7_fix_gpfs_compatibility.patch': '9739134ce273a691c9deac6e410510653a88c1542b60dbf8789e4a423447d4f6'},
+    {'OpenMPI-5.0.3_disable_opal_path_nfs_test.patch':
+     '75d4417e35252ea3a19b2792f1b06e9aeb408c253aa4921d77226d57b71dee45'},
 ]
 
 builddependencies = [
-    ('pkgconf', '2.2.0'),
-    ('Autotools', '20231222'),
+    ('pkgconf', '2.4.3'),
+    ('Perl', '5.40.2'),
+    ('Autotools', '20250527'),
 ]
 
 dependencies = [
     ('zlib', '1.3.1'),
-    ('hwloc', '2.10.0'),
+    ('hwloc', '2.12.1'),
     ('libevent', '2.1.12'),
-    ('UCX', '1.16.0'),
-    ('libfabric', '1.21.0'),
-    ('PMIx', '5.0.2'),
-    ('PRRTE', '3.0.5'),
-    ('UCC', '1.3.0'),
+    ('UCX', '1.19.0'),
+    ('libfabric', '2.1.0'),
+    ('PMIx', '5.0.8'),
+    ('PRRTE', '3.0.11'),
+    ('UCC', '1.4.4'),
 ]
 
 # CUDA related patches and custom configure option can be removed if CUDA support isn't wanted.
-preconfigopts = 'gcc -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
-configopts = '--with-cuda=%(start_dir)s/opal/mca/cuda --with-show-load-errors=no'
+preconfigopts = 'clang -Iopal/mca/cuda/include -shared opal/mca/cuda/lib/cuda.c -o opal/mca/cuda/lib/libcuda.so && '
+# Update configure to include changes from the "disable_opal_path_nfs_test" patch
+preconfigopts += './autogen.pl --force && '
 # Disable building Level Zero components of romio if system dependencies are picked up. Sources are not based on
 # recent Level Zero interface anyway, so there's a high chance that builds fail.
 # See https://github.com/open-mpi/ompi/issues/10235
 preconfigopts += 'sed -i "s/have_ze=yes/have_ze=no/" %(start_dir)s/3rd-party/romio341/mpl/configure && '
+configopts = '--with-cuda=%(start_dir)s/opal/mca/cuda --with-show-load-errors=no'
 # Do not pick up the system library automatically
 configopts += ' --without-xpmem'

Thyre · 2025-11-07T07:58:42Z

Test report by @Thyre
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 11 mins 23 secs) (5 easyconfigs in total)
Linux - Linux Arch Linux UNKNOWN, x86_64, AMD Ryzen 7 7800X3D 8-Core Processor (zen4), 1 x AMD Navi 48 [Radeon RX 9070/9070 XT/9070 GRE] (device id: 0x7550, gfx: gfx1201, driver: Linuxversion6.17.6-arch1-1(linux@archlinux)(gcc(GCC)15.2.120250813,GNUld(GNUBinutils)2.45.0)#1SMPPREEMPT_DYNAMICWed,29Oct202522:23:47+0000), 1 x AMD Raphael (device id: 0x164e, gfx: gfx1036, driver: Linuxversion6.17.6-arch1-1(linux@archlinux)(gcc(GCC)15.2.120250813,GNUld(GNUBinutils)2.45.0)#1SMPPREEMPT_DYNAMICWed,29Oct202522:23:47+0000), Python 3.13.7
See https://gist.github.com/Thyre/6b42cb04c2b5b06d0a19865ef9c0ad9f for a full test report.

Thyre · 2025-11-07T08:08:05Z

Test report by @Thyre
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 19 mins 54 secs) (5 easyconfigs in total)
ZAM054 - Linux Zorin OS 18, x86_64, 12th Gen Intel(R) Core(TM) i7-1260P (skylake), 1 x NVIDIA NVIDIA GeForce MX550, 580.95.05, Python 3.12.3
See https://gist.github.com/Thyre/c3cf2ae7706e17ab9a9d0be650e37425 for a full test report.

Crivella · 2025-11-07T15:33:40Z

Test report by @Crivella
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 18 mins 8 secs) (5 easyconfigs in total)
crivella-desktop - Linux Ubuntu 22.04.5 LTS (Jammy Jellyfish), x86_64, 13th Gen Intel(R) Core(TM) i9-13900K (skylake), Python 3.11.13
See https://gist.github.com/Crivella/d70dc00d42b0f1ed6f8fd2972a939793 for a full test report.

Thyre · 2025-11-09T10:38:52Z

Test report by @Thyre
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 23 mins 52 secs) (5 easyconfigs in total)
Framework - Linux Fedora Linux 43, x86_64, AMD Ryzen AI 7 350 w/ Radeon 860M (zen5), 1 x AMD Krackan [Radeon 840M / 860M Graphics] (device id: 0x1114, gfx: gfx1152, driver: Linuxversion6.17.7-300.fc43.x86_64(mockbuild@d49b948bbfce45ee82827ac76e852536)(gcc(GCC)15.2.120251022(RedHat15.2.1-3),GNUldversion2.45-1.fc43)#1SMPPREEMPT_DYNAMICSunNov215:30:09UTC2025), Python 3.14.0
See https://gist.github.com/Thyre/a43fd2431dfb178085530687a6bb9d09 for a full test report.

Thyre · 2025-11-11T15:15:22Z

Test report by @Thyre
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 21 mins 24 secs) (5 easyconfigs in total)
datenlager - Linux Ubuntu 24.04, x86_64, AMD Ryzen 7 3700X 8-Core Processor, Python 3.12.3
See https://gist.github.com/Thyre/4aad0545f4b869cc63e927a7629e9bc8 for a full test report.

Signed-off-by: Jan André Reuter <[email protected]>

boegel · 2025-11-23T09:56:28Z

Test report by @boegel
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 20 mins 26 secs) (5 easyconfigs in total)
aarch64-neoverse-v1-node1.int.aws-rocky88-202310.eessi.io - Linux Rocky Linux 8.10, AArch64, ARM UNKNOWN (neoverse_v1), Python 3.6.8
See https://gist.github.com/boegel/86001eff7f25d8a22ec067f013c64777 for a full test report.

boegel · 2025-11-23T10:25:48Z

Test report by @boegel
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 49 mins 26 secs) (5 easyconfigs in total)
node4226.shinx.os - Linux RHEL 9.6, x86_64, AMD EPYC 9654 96-Core Processor (zen4), Python 3.9.21
See https://gist.github.com/boegel/729afe3eae8a0532930d9f3a6e5d7971 for a full test report.

boegel · 2025-11-23T11:12:00Z

Test report by @boegel
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759, easybuilders/easybuild-easyblocks#3855, easybuilders/easybuild-easyblocks#3977
SUCCESS
Build succeeded for 5 out of 5 (total: 20 mins 43 secs) (5 easyconfigs in total)
aarch64-neoverse-v1-node1.int.aws-rocky88-202310.eessi.io - Linux Rocky Linux 8.10, AArch64, ARM UNKNOWN (neoverse_v1), Python 3.6.8
See https://gist.github.com/boegel/dc0a62ca858f57429555995a0a3ac4d9 for a full test report.

boegel · 2025-11-23T13:21:05Z

Test report by @boegel
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759, easybuilders/easybuild-easyblocks#3855, easybuilders/easybuild-easyblocks#3977
SUCCESS
Build succeeded for 5 out of 5 (total: 50 mins 11 secs) (5 easyconfigs in total)
node4226.shinx.os - Linux RHEL 9.6, x86_64, AMD EPYC 9654 96-Core Processor (zen4), Python 3.9.21
See https://gist.github.com/boegel/ea5e04665ec541afbc5e34e6764656e1 for a full test report.

Crivella · 2025-11-26T15:56:32Z

Tested with FW PR at easybuilders/easybuild-framework@232ef0b

Test report by @Crivella
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 14 mins 15 secs) (5 easyconfigs in total)
crivella-desktop - Linux Ubuntu 22.04.5 LTS (Jammy Jellyfish), x86_64, 13th Gen Intel(R) Core(TM) i9-13900K (skylake), Python 3.11.14
See https://gist.github.com/Crivella/5d52caf5b3b2381e8eb8157f0afbdd43 for a full test report.

boegel · 2025-12-06T16:56:27Z

@boegelbot please test @ jsc-zen3
CORE_CNT=16
EB_ARGS="--include-easyblocks-from-pr 3759"

boegelbot · 2025-12-06T17:00:14Z

@boegel: Request for testing this PR well received on jsczen3l1.int.jsc-zen3.fz-juelich.de

PR test command 'if [[ develop != 'develop' ]]; then EB_BRANCH=develop ./easybuild_develop.sh 2> /dev/null 1>&2; EB_PREFIX=/home/boegelbot/easybuild/develop source init_env_easybuild_develop.sh; fi; EB_PR=24481 EB_ARGS="--include-easyblocks-from-pr 3759" EB_CONTAINER= EB_REPO=easybuild-easyconfigs EB_BRANCH=develop /opt/software/slurm/bin/sbatch --job-name test_PR_24481 --ntasks="16" ~/boegelbot/eb_from_pr_upload_jsc-zen3.sh' executed!

exit code: 0
output:

Submitted batch job 9022

Test results coming soon (I hope)...

Details

- notification for comment with ID 3620695253 processed

Message to humans: this is just bookkeeping information for me,
it is of no use to you (unless you think I have a bug, which I don't).

boegelbot · 2025-12-06T17:27:53Z

Test report by @boegelbot
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
FAILED
Build succeeded for 3 out of 5 (total: 27 mins 17 secs) (5 easyconfigs in total)
jsczen3c1.int.jsc-zen3.fz-juelich.de - Linux Rocky Linux 9.6, x86_64, AMD EPYC-Milan Processor (zen3), Python 3.9.21
See https://gist.github.com/boegelbot/1bc94d7dea592b4441d1377da34ac878 for a full test report.

edit: 1 failing test: FAIL: opal_path_nfs

Thyre · 2025-12-06T17:36:28Z

Lets try again to test if we get a success

@boegelbot please test @ jsc-zen3
CORE_CNT=16
EB_ARGS="--include-easyblocks-from-pr 3759 --installpath /tmp/$USER/ecpr-24481"

boegelbot · 2025-12-06T17:40:10Z

@Thyre: Request for testing this PR well received on jsczen3l1.int.jsc-zen3.fz-juelich.de

PR test command 'if [[ develop != 'develop' ]]; then EB_BRANCH=develop ./easybuild_develop.sh 2> /dev/null 1>&2; EB_PREFIX=/home/boegelbot/easybuild/develop source init_env_easybuild_develop.sh; fi; EB_PR=24481 EB_ARGS="--include-easyblocks-from-pr 3759 --installpath /tmp/$USER/ecpr-24481" EB_CONTAINER= EB_REPO=easybuild-easyconfigs EB_BRANCH=develop /opt/software/slurm/bin/sbatch --job-name test_PR_24481 --ntasks="16" ~/boegelbot/eb_from_pr_upload_jsc-zen3.sh' executed!

exit code: 0
output:

Submitted batch job 9025

Test results coming soon (I hope)...

Details

- notification for comment with ID 3620761085 processed

Message to humans: this is just bookkeeping information for me,
it is of no use to you (unless you think I have a bug, which I don't).

boegel · 2025-12-06T17:48:56Z

@Thyre Looks like were' just missing a patch for OpenMPI here, see #22817 ?

Thyre · 2025-12-06T17:53:30Z

@Thyre Looks like were' just missing a patch for OpenMPI here, see #22817 ?

@boegel, looks like we're missing it from all recent OpenMPI versions...
I can fix that later today, or can apply the suggestion if one is made

boegel · 2025-12-06T18:06:37Z

@Thyre Looks like were' just missing a patch for OpenMPI here, see #22817 ?

@boegel, looks like we're missing it from all recent OpenMPI versions... I can fix that later today, or can apply the suggestion if one is made

I'm opening a PR for fixing that in existing OpenMPI easyconfigs right now...

I'll update this PR accordingly as well.

boegelbot · 2025-12-06T18:09:31Z

Test report by @boegelbot
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 28 mins 46 secs) (5 easyconfigs in total)
jsczen3c1.int.jsc-zen3.fz-juelich.de - Linux Rocky Linux 9.6, x86_64, AMD EPYC-Milan Processor (zen3), Python 3.9.21
See https://gist.github.com/boegelbot/125f548f24f1b4d31094d250affd4c70 for a full test report.

boegel · 2025-12-06T18:09:46Z

@Thyre Looks like were' just missing a patch for OpenMPI here, see #22817 ?

@boegel, looks like we're missing it from all recent OpenMPI versions... I can fix that later today, or can apply the suggestion if one is made

I'm opening a PR for fixing that in existing OpenMPI easyconfigs right now...

I'll update this PR accordingly as well.

see:

consistently add patch to disable flaky opal_path_nfs test in recent OpenMPI easyconfigs #24763

…PI v5.0.8 with llvm-compilers toolchain

boegel · 2025-12-06T18:12:52Z

@boegelbot please test @ jsc-zen3
CORE_CNT=16
EB_ARGS="--include-easyblocks-from-pr 3759"

boegelbot · 2025-12-06T18:20:12Z

@boegel: Request for testing this PR well received on jsczen3l1.int.jsc-zen3.fz-juelich.de

PR test command 'if [[ develop != 'develop' ]]; then EB_BRANCH=develop ./easybuild_develop.sh 2> /dev/null 1>&2; EB_PREFIX=/home/boegelbot/easybuild/develop source init_env_easybuild_develop.sh; fi; EB_PR=24481 EB_ARGS="--include-easyblocks-from-pr 3759" EB_CONTAINER= EB_REPO=easybuild-easyconfigs EB_BRANCH=develop /opt/software/slurm/bin/sbatch --job-name test_PR_24481 --ntasks="16" ~/boegelbot/eb_from_pr_upload_jsc-zen3.sh' executed!

exit code: 0
output:

Submitted batch job 9027

Test results coming soon (I hope)...

Details

- notification for comment with ID 3620851662 processed

Message to humans: this is just bookkeeping information for me,
it is of no use to you (unless you think I have a bug, which I don't).

boegelbot · 2025-12-06T18:46:51Z

Test report by @boegelbot
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
FAILED
Build succeeded for 3 out of 5 (total: 26 mins 2 secs) (5 easyconfigs in total)
jsczen3c2.int.jsc-zen3.fz-juelich.de - Linux Rocky Linux 9.6, x86_64, AMD EPYC-Milan Processor (zen3), Python 3.9.21
See https://gist.github.com/boegelbot/c6ca76d659a7643b2081d383dd33c09c for a full test report.

Thyre · 2025-12-06T19:02:04Z

@boegelbot please test @ jsc-zen3
CORE_CNT=16
EB_ARGS="--include-easyblocks-from-pr 3759"

boegelbot · 2025-12-06T19:10:10Z

@Thyre: Request for testing this PR well received on jsczen3l1.int.jsc-zen3.fz-juelich.de

PR test command 'if [[ develop != 'develop' ]]; then EB_BRANCH=develop ./easybuild_develop.sh 2> /dev/null 1>&2; EB_PREFIX=/home/boegelbot/easybuild/develop source init_env_easybuild_develop.sh; fi; EB_PR=24481 EB_ARGS="--include-easyblocks-from-pr 3759" EB_CONTAINER= EB_REPO=easybuild-easyconfigs EB_BRANCH=develop /opt/software/slurm/bin/sbatch --job-name test_PR_24481 --ntasks="16" ~/boegelbot/eb_from_pr_upload_jsc-zen3.sh' executed!

exit code: 0
output:

Submitted batch job 9028

Test results coming soon (I hope)...

Details

- notification for comment with ID 3620958169 processed

Message to humans: this is just bookkeeping information for me,
it is of no use to you (unless you think I have a bug, which I don't).

Signed-off-by: Jan Andre Reuter <[email protected]>

boegelbot · 2025-12-06T19:41:39Z

Test report by @boegelbot
Using easyblocks from PR(s) easybuilders/easybuild-easyblocks#3759
SUCCESS
Build succeeded for 5 out of 5 (total: 31 mins 11 secs) (5 easyconfigs in total)
jsczen3c2.int.jsc-zen3.fz-juelich.de - Linux Rocky Linux 9.6, x86_64, AMD EPYC-Milan Processor (zen3), Python 3.9.21
See https://gist.github.com/boegelbot/7b02b2c4786bc3a9c90ee2e348804593 for a full test report.

Thyre · 2025-12-06T19:50:18Z

Test report by @Thyre
SUCCESS
Build succeeded for 5 out of 5 (total: 22 mins 28 secs) (5 easyconfigs in total)
Framework - Linux Fedora Linux 43, x86_64, AMD Ryzen AI 7 350 w/ Radeon 860M (zen5), 1 x AMD Krackan [Radeon 840M / 860M Graphics] (device id: 0x1114, gfx: gfx1152, driver: Linuxversion6.17.9-300.fc43.x86_64(mockbuild@928180b471f54176bbf3623ccb67b438)(gcc(GCC)15.2.120251111(RedHat15.2.1-4),GNUldversion2.45.1-1.fc43)#1SMPPREEMPT_DYNAMICMonNov2423:31:27UTC2025), Python 3.14.0
See https://gist.github.com/Thyre/8b0f2a9a9d76719b3ec970cc4b20b699 for a full test report.

boegel · 2025-12-07T10:30:42Z

Test report by @boegel
SUCCESS
Build succeeded for 5 out of 5 (total: 47 mins 36 secs) (5 easyconfigs in total)
node3551.doduo.os - Linux RHEL 9.6, x86_64, AMD EPYC 7552 48-Core Processor (zen2), Python 3.9.21
See https://gist.github.com/boegel/685e917f4fc793b7bae967d9b23a1a0d for a full test report.

boegel

lgtm

llvm-compilers description fixed

boegel · 2025-12-07T11:01:44Z

Going in, thanks @Thyre!

boegel · 2025-12-07T16:36:06Z

Test report by @boegel
SUCCESS
Build succeeded for 5 out of 5 (total: 50 mins 52 secs) (5 easyconfigs in total)
node4216.shinx.os - Linux RHEL 9.6, x86_64, AMD EPYC 9654 96-Core Processor (zen4), Python 3.9.21
See https://gist.github.com/boegel/d166f8352444bb2b1e63b7a3c59b06e5 for a full test report.

adding easyconfigs: lompi-2025b.eb, lmpich-2025b.eb, llvm-compilers-2…

65e75e0

…0.1.8.eb

Thyre added the new label Nov 7, 2025

github-actions Bot added the update label Nov 7, 2025

Thyre added the 2025b issues & PRs related to 2025b common toolchains label Nov 7, 2025

Thyre mentioned this pull request Nov 7, 2025

{lang,toolchain}[lfbf/2025b,system/system] lfbf v2025b, SciPy-bundle v2025.07 #24482

Merged

3 tasks

This comment was marked as outdated.

Sign in to view

Crivella mentioned this pull request Nov 10, 2025

{toolchain}[lfoss/2025b] Add files for lfoss toolchain 2025b #24514

Merged

Thyre mentioned this pull request Nov 10, 2025

{tools}[lfoss/2025b] GROMACS v2025.2, HPL v2.3, HPCG v3.1, ... #24517

Merged

5 tasks

This was referenced Nov 12, 2025

{tools}[foss/2023b] ADIOS2 v2.10.2 #24316

Open

{math,data,chem}[lfoss/2025b] QuantumESPRESSO 7.5, HDF5 1.14.6, libxc 7.0.0, ELPA 2025.06.001 #24516

Merged

bartoldeman previously requested changes Nov 12, 2025

View reviewed changes

Comment thread easybuild/easyconfigs/l/llvm-compilers/llvm-compilers-20.1.8.eb Outdated

Fix llvm-compilers description

7e8dabc

Signed-off-by: Jan André Reuter <[email protected]>

github-actions Bot removed the 2025b issues & PRs related to 2025b common toolchains label Nov 12, 2025

Thyre added the 2025b issues & PRs related to 2025b common toolchains label Nov 19, 2025

boegel added this to the next release (5.2.0?) milestone Nov 21, 2025

This was referenced Nov 23, 2025

{perf}[lompi/2025b] MUST v1.11.2 #24658

Merged

{numlib}[lmpich/2025b] FFTW.MPI v3.3.10, lmpflf v2025b, ScaLAPACK v2.2.2 w/ fb #24659

Merged

{tools}[lmpflf/2025b] HPCG v3.1, HPL v2.3, GROMACS v2025.2, ... #24660

Merged

github-actions Bot removed the 2025b issues & PRs related to 2025b common toolchains label Nov 29, 2025

add patch to disable flaky opal_path_nfs test in easyconfig for OpenM…

d564b13

…PI v5.0.8 with llvm-compilers toolchain

Thyre commented Dec 6, 2025

View reviewed changes

Comment thread easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb

Thyre commented Dec 6, 2025

View reviewed changes

Comment thread easybuild/easyconfigs/o/OpenMPI/OpenMPI-5.0.8-llvm-compilers-20.1.8.eb

Reconfigure after adding patches

786cf3f

Thyre mentioned this pull request Dec 6, 2025

consistently add patch to disable flaky opal_path_nfs test in recent OpenMPI easyconfigs #24763

Merged

Add llvm-compilers to allowed Bundles without sanity check

34d5d3e

Signed-off-by: Jan Andre Reuter <[email protected]>

boegel approved these changes Dec 7, 2025

View reviewed changes

boegel merged commit b33c9f7 into easybuilders:develop Dec 7, 2025
8 checks passed

Conversation

Thyre commented Nov 7, 2025 • edited by boegel Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

github-actions Bot commented Nov 7, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Updated software MPICH-4.3.2-llvm-compilers-20.1.8.eb

Updated software OpenMPI-5.0.8-llvm-compilers-20.1.8.eb

Uh oh!

Thyre commented Nov 7, 2025

Uh oh!

Thyre commented Nov 7, 2025

Uh oh!

This comment was marked as outdated.

This comment was marked as outdated.

Crivella commented Nov 7, 2025

Uh oh!

Thyre commented Nov 9, 2025

Uh oh!

Thyre commented Nov 11, 2025

Uh oh!

Uh oh!

boegel commented Nov 23, 2025

Uh oh!

boegel commented Nov 23, 2025

Uh oh!

boegel commented Nov 23, 2025

Uh oh!

boegel commented Nov 23, 2025

Uh oh!

Crivella commented Nov 26, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

boegel commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025 • edited by boegel Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Thyre commented Dec 6, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

boegel commented Dec 6, 2025

Uh oh!

Thyre commented Dec 6, 2025

Uh oh!

boegel commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

boegel commented Dec 6, 2025

Uh oh!

boegel commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

Uh oh!

Uh oh!

Thyre commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

boegelbot commented Dec 6, 2025

Uh oh!

Thyre commented Dec 6, 2025

Uh oh!

boegel commented Dec 7, 2025

Uh oh!

boegel left a comment

Choose a reason for hiding this comment

Uh oh!

boegel commented Dec 7, 2025

Uh oh!

Uh oh!

boegel commented Dec 7, 2025

Thyre commented Nov 7, 2025 •

edited by boegel

Loading

github-actions Bot commented Nov 7, 2025 •

edited

Loading

Updated software `MPICH-4.3.2-llvm-compilers-20.1.8.eb`

Updated software `OpenMPI-5.0.8-llvm-compilers-20.1.8.eb`

Crivella commented Nov 26, 2025 •

edited

Loading

boegelbot commented Dec 6, 2025 •

edited by boegel

Loading

Thyre commented Dec 6, 2025 •

edited

Loading